PDA

View Full Version : Transmission and Drivetrain

  1. 904-727 Comparision
  2. Big block or small block 727?
  3. Have you ever seen what happens when a starter ring gear comes off a converter.......
  4. Align that pre-magnum converter and flex plate on the first try!
  5. 727 Vibration GONE!
  6. Driveshaft and crossmember info needed
  7. where can i get this
  8. 73 Cuda Front Suspension
  9. caltracs and mono leafs help..
  10. Submerged rear axle
  11. mopar newbie
  12. What Clutch, PP, Flywheel to use?
  13. swapping 904 to a 727
  14. help decode a833
  15. Rear end measurements
  16. Pinion Angle?
  17. 8 3/4 problem
  18. 833 shifter
  19. 8 3/4 rear end not strong enough?
  20. rear axle not centered?
  21. e body 8 3/4 rear end
  22. I need some pics of 4 speed trans.
  23. Shifter Hole size Question?
  24. Hemi Transmission 4-Speed
  25. Hemi Transmission 4-Speed
  26. Help please!! Which clutch to use 4 hemi 4-speed?
  27. Swap Dana 60 B-body for E-Body
  28. Whats the best cluch for my 440 challenger ???
  29. tremec TKO600
  30. Clutch Problem - 70 Cuda 440+6
  31. question about a dana 60
  32. Clutch--brake assembly
  33. 74 4 speed swap???
  34. tranns
  35. What is this for? Shifter bracket
  36. Need some input?
  37. D34 Torqueflite Tranny
  38. What tranny do I have on my '72 Cuda?
  39. Column to floor conversion
  40. drive shaft questions
  41. Can Later model Automatics bolt to older B/RB and LA blocks
  42. 70 cuda 383 bellhousing dilema?
  43. Heavy Duty Suspension?
  44. anyone have holley rebuild their carbs?
  45. TF904 stall converter
  46. will 727 with reverse manual shft work on street
  47. trouble shifting into reverse..........
  48. A-Body A-833 in an E-Body?
  49. T/A Rear Springs
  50. will 69 roadrunner 4 speed swap into 70 cuda
  51. A500/518 into E-body with LA engine
  52. does pilot bushing fit loose and stick out?
  53. T/A column lock
  54. auto to manual trans.
  55. Why is my FOUR speed SHIFTER Different?
  56. Hemi 4 speed conversion
  57. 833 oil or
  58. hurst competition plus...but from what?
  59. Dana Trac Pac?
  60. 360 motor 350 or 375 hp 904 stock what are my options in selecting a 8 3/4 rear
  61. What are these HD Linkage rods for?
  62. 8 3/4 rear 3.23 suregrip
  63. Shock plates need to be swapped out
  64. oblong pilot shaft bushing
  65. Manual to Auto swap
  66. OD manual trans into 73 Challenger
  67. 4.11 sure grip
  68. Dana 60 4.10 (from a truck)
  69. Pistol grip shifter removal
  70. 8 3/4" or 8 1/4" rear end
  71. Leaky rear!!
  72. 8 3/4 b/e body swap
  73. a-727 tranny
  74. A833 tranny
  75. Slapstick replacement
  76. 73 Challenger wanna go from Auto to Standard, what do I need?
  77. Which Differential is this?
  78. YOKE SIZE
  79. motor mounts
  80. 727 floor trans linkage
  81. Open to Posi Axle Adjustment
  82. dana 60 cover???
  83. Shifter linkage adjustment.
  84. Speedometer drive
  85. 741 open to 742 posi pinion snubber
  86. 73 cuda 9 inch conversion
  87. Torque Converter Stall
  88. torque converter bolts