• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results for query: *

  1. P

    A/C Delete

    Mancini Racing has a bunch of engine pulleys. Pulleys Crankshaft Pulley Water Pump Pulley
  2. P

    WTB WTB - 70 Cuda 4 speed console

    I recently saw a video by the guy that does the barn find photos, where Mopar City in Illinois has several e-body consoles in various colors. You might give them a call.
  3. P

    Proportional Valve Rebuildable ?

    Check these guys out... Instructions and parts to rebuild your valve. Home | Muscle Car Research LLC
  4. P

    8HP90 Install help needed

    Did you trim away some of the tabs and bosses on the case that are known to interfere? I've seen plenty of pictures of the areas to trim on the 8HP70 (Attached), but not the HP90.
  5. P

    Drag link unlevel.

    Download the 70 Challenger factory service manual found over at MyMopar.com. Go over the direction of the centerlink and how all the steering parts connect from a factory standpoint. Then look over the Borgeson box and how it mounts. You may need some help from Borgeson on shimming the box.
  6. P

    So brand of E-Body Seat cover kit did you buy for your car?

    Everyone says Legendary is the best, but a good upholstry shop should be able to make most anything work well. Has anyone tried PG Classic seat covers or the leather seat covers by Lseat.com? 1970-1974 Dodge Challenger Custom Real Leather Seat Covers (Front) Seats
  7. P

    Garage squad

    The best way to get the younger crowd into these old rides is the Gen3 Hemi route. Maybe it alienates the stock restoration purist. In my opinion, there's value to be had going the modern engine route. The kids dont know, dont care about old school technology anything, especially carbs.
  8. P

    Sell it or keep it, #'s matching 73 Cuda 340

    Numbers matching on a 72-74 e-body means very little. I would almost extend that to numbers matching doesnt mean much on any small block e-body outside of the TA/AAR cars. If you're concerned, remove the engine, tuck it away somewhere. Then find another block to build, hit up Blueprint, or go...
  9. P

    Regarding rear shock absorbers

    AR Engineering has a custom rear shock plate where you can weld the shock mount to the plate in the location you need it. Shock Plate, Race Style | AR Engineering
  10. P

    Passenger brake light

    As mentioned if you checked for power back at the socket and have 12v, it may be a ground issue. For extra insurance, I soldered a ground wire to socket bases on my Challenger rather than hoping to achieve the ground from the friction fit housing. I also upgraded the 1157 bulb to a 2357 bulb...
  11. P

    Car Show Signs- what's cool? what is lame?

    Vendors...Its nice when part prices are clearly marked. I myself and a lot of others never like the parts guy out there that is "displaying their collection" of parts. The reason I say "displaying their collection" is that the part prices are so high, few in their right mind would ever pay...
  12. P

    Car Show Signs- what's cool? what is lame?

    I like the binder idea, but some get carried away with the photos. Maybe a laminated page or two with several photos showing the progress is really all that's needed. If you're into signs, the best ones are the ones with a base plate that the front tire rolls on top of. This way it doesn't...
  13. P

    Undercoating Removal Advice

    I used a variety of tools. For larger flat sections I used an oscillating saw with a scraper blade. I bought a cheap one to do this. A drill with a variety of different wire brushes works too. Then also razor blades, putty knives, etc. I heard yellow easy off oven cleaner works. It didn’t...
  14. P

    How low can you go

    While not a correct ride height measurement, what is your distance from the ground to the top of the wheel opening? The front on my 72 Challenger measures 24 inches. The back is about 1-1/2 higher
  15. P

    Modern Challenger Dash for 73 Cuda

    Dakota Digital Mopar
  16. P

    Looking for best place to buy a 727 TF and convertor for 1000+ hp Hemi build?

    Dynamic Converters // Pro-Formance Transmissions Home - A&A Transmissions
  17. P

    A904 forward drum, any aftermarket?

    A&A Transmission should have what you need. Drums - A&A Transmissions
  18. P

    Challenger door differences

    Is there a difference in passenger door height? Seems some cars have a 1/2-inch gap between the bottom of the door and the rocker. While others are much better.
Back
Top