Search results for query: *

OK folks. Got it. I read a post on here about the connectors to the ballast resistor and elsewhere. So I went out and just wiggled the wires on the ballast connector and the car started right up. The wires looked brand new, but I guess when these cars sit they have a way of corroding inside...

Changed ballast resistor and still having same problem. As long as I hold key in the start position the car will run. As soon as I release the key the engine stops? I think my ECU may be faulty.

Hi, Car started fine yesterday. Today I turned the key, car started right up and as soon as I released the key she died. Did this several times with the same ending. If I hold the key all the way in the start position, it appeas to want to stay running until I release the key. Seems this...

Ya, when I get them direct from OER. I think they are back ordered from you know where. Offshore.

Ya, Like that was all I needed lol

Yes. Both brand new side marker lights were causing a direct short because the person in China who assembled theminstalled the two wires backwards. They said that stuff happens? Sending me a new set. Who would have thought to look there when I just took them out of the box?? Buyer Beware...

Dont know, but I am pissed. Those were not cheap but they were cheaply made. My old ones had a separate spade plug welded to the outside of the bulb holder which the ground wire was plugged onto. These new OER ones seemed to hide all that under a plastic sheath. I will be calling them...

I spent 5 hours today isolating the front lighting harness which was just bought from year one. I ended up just disconnecting (unplugging) the two front side marker lights and the two front valance parking lights. I then sent power down number 11 and did not blow a fuse. I then attached just...

OK Did some more probing. First I should say that I recently changed the front end lighting harness and also installed 4 new OEM side marker light housings with the attached pigtails. I was thinking a headlamp switch or the dash dimmer switch which are both original to the car and maybe why my...

OK Did some more probing. First I should say that I recently changed the front end lighting harness and also installed 4 new OEM side marker light housings with the attached pigtails. I was thinking a headlamp switch or the dash dimmer switch which are both original to the car and maybe why...

I noticed my taillights were not working and my side marker lights and also my dash cluster lights. I went under the dash and found a 20amp fuse blown. I changed the fuse, turned the light switch on and no side markers, no tailights and no dash cluster lights. I went back under and the fuse...

That website ad is three years old for Carlisle. Look at the dates?

Looking to meet up at Carlisle with anybody who has a 70 challenger se headliner shell for sale. Just need the shell not the console, but will take anything available as long as it is nice and not broken.

Totally Auto use to sell this but they are no longer around. Can anybody direct me to the textured light argent silver paint for some interior work on my car. Overhead console. I can't use smooth or gloss. The totally auto stuff was spot on. They had their private label on it so I do not...

This is a decent ebody crush can dates 9-69. It has been beadblasted primed and painted the low gloss black. It has the horn wire and is very clean. $75.00 and I will include FREE SHIPPING

Here is mine. Still have not decided to install side stripes or not. Looks like we liked the same wheels and tires.

Ya, me too. I think I had the key in the on position and as soon as I saw smoke and selled wire I shut the key off and it all stopped. Those starter terminals are very close to the block. I put one in my demon and I used that terminal stud relocation kit. I should have known better and I had...

So far I have had my 7 years old optima battery load tested and it dropped to 11 volts and it was at 100% charged. I am going to replace it for starters. I also think I may have an issue with the mini starter studs touching my block which has a nice ground wire coming off the negative side at...

I am searching for my power probe now. But I failed to mention I had replaced my ignition key cylinder a couple weeks ago and the car started fine after install. This car has been garaged and not run much in the past 7 years. All I did was change the starter to a Mopar high torque mini...

Hi, Just installed a new Mopar mini high torques starter and installed a new starter solinoid. Nothing happens except some clicks at the solinoid switch. Battery is at 100% and at 14 volts. While standing in front of the battery side fender I all of a sudden smelled wire burning and pulled...