Search results for query: *

Title says it all... I need the wide hood moulding for a '71 Challenger with the M28 option. It doesn't need to be perfect because the car's not perfect.

I need a complete left front side marker for my '71 Challenger, including the retainer cup. The chrome doesn't need to be perfect (pits are OK), but I'd prefer straight and unbroken. Same with the lens. I can pay with PayPal if you send me an invoice. I don't have PayPal myself so F&F is off...

New in Legendary box. 1973 E-body white vinyl seat covers, F/R set. Legendary part #AA73CBJ0010200 and AA73CBJ0040200. Pattern matches '72 and '74 E-bodies. '72 uses a different insert grain and '74 uses different outer grain. Differences are minor. $675 shipped. No PayPal.

Legendary vinyl top. White boar grain, 31¾" seam width correct for 1970-'74 Barracuda/Cuda and '73-'74 Challenger (will fit '70-'72). Still in Legendary box, part #VTL1BJ02. $300 shipped. No Paypal.

I picked up a solid '71 Challenger 318/3-speed a couple of weeks ago, but the grille is missing. Cracks and breaks are OK as long as it can be installed and will still look like a '71. I'd also like to find an M28 hood moulding; again--I don't need perfection. I'm looking for something...

The PCM is failing in my '92 Dakota and it's not worth replacing. The truck's just too far gone and it's good money after bad at this point. The 3.9L Magnum V6 runs great (when the PCM works) with a little smoke at startup which I expect is valve seals. The transmission is an Aisin AX-15...

I have a '72-up Challenger header panel in repairable condition. It has some cracks and one spot damaged beneath the driver's headlamps that's largely hidden with the bumper installed. Includes everything shown currently installed: Grille with minor warpage and cracks, decent grille emblem...

Unbelievable. I was getting ready to go out and replace the cad-cell relay in my defunct garage furnace so I could get back to working on my Challenger when a horrible sound started emanating from my basement. I thought I recognized it immediately, but I was a bit off the mark. I went down to...

Factory single-speaker AC dashpad for 1971-74. This is not a reproduction or remanufactured pad, it's production-line original equipment Mopar. The vinyl is still soft and pliable. It is not perfect, but they never were even when new. There is no cracking in the speaker or defroster outlet...

I recently decided to install a T/A hood on my Challenger. The question I have is regarding the hood moulding. I'm aware of the T/A-specific unit due to the width difference, but my car is a '74 so the matching "mouldings" on the leading edges of the fenders are actually part of the grille...

New Legendary Auto white vinyl seat covers for '73 Barracuda/'Cuda and Challenger, part numbers AA73CBJ0010200. (front) and AA73CBJ0040200 (rear, mismarked on box as 73CBJ0040220). These also fit 1974 and have the correct Empire grain inserts, but the skirt grain is slightly different (Coachman...

New Legendary Auto white boar grain vinyl top for '70-'74 Barracuda/'Cuda and '73-'74 Challenger, part number VTL1BJ02. The box is in rough shape, but you don't install that. $200 or best offer plus actual shipping. Checks, money orders, or cash in person are fine. I do not use PayPal but I...

How long is the AAR-T/A antenna extension cable? It's not for lack of trying that I can't find this information. I went back a few years in forum searches and have done the standard internet thing, to no avail... as in, not even a hint. Cable routing? No problem. 'Twas a topic here a couple...

I'm looking for the chrome dealer emblem that Peters Dodge in Milwaukee, WI placed on cars they sold during the early 1970s. It isn't E-body or even model-specific but I need--OK, really want--one for my Challenger (which wasn't sold there--long story). Peters was apparently huge into...

I'm looking to get my Rallye dash gauges restored, and am wondering what vendors board members have used with good results. I don't need any functional gauge work performed, other than possibly a speedometer calibration (I haven't checked that yet). I thought about the Premium Dash Decals kit...

This is one of the nicest 1971 340 ThermoQuad intakes I've ever seen. This intake has no pitting or damage to it, having been removed in the early/mid '70s and stored indoors since. Included with it are the hard-to-find choke cup and the factory original choke thermostat (stamped 75, with a...

I'm looking for the "lower grille" or insert for the front valance of my '74 Challenger. I don't need the moulding, just the plastic piece that fits inside it. Please PM if you've got one. Thanks!

This is an original factory '72-'74 Challenger trunk lid that has had a T/A spoiler installed. Obviously, it fits all years but does not have the same underbracing cutouts as the '70-'71. The decklid is rust-free except for some wipe-off surface rust in the area of the trunk's latch hook...

I'm looking for a Holley Strip Dominator intake manifold for small-block W2 heads. It will have the casting number 300-17 on the underside of the intake facing the camshaft. This is an oval-port intake that will not fit standard heads; if you have (or find) one with rectangular ports it's...

Brand new Legendary seat covers for '73-'74 Barracuda/Cuda/Challenger models, white w/Empire grain inserts and Coachman skirts. Legendary part #AA73BCJ0010200 Taken out for photo purposes and to check because the box is pretty rough, but they're perfect. No stains, just need cleaning after...