Search results for query: *

Saw this short video online. A company out of Pennsylvania will take a Hellcat and transform it into a 1968 Charger using carbon fiber body panels. I found it interesting. If anyone has an extra 300K that's burning a hole in their pocket, you can be the first one on your block to own...

Good Day, All I am looking to verify that my heater hoses are properly connected. Any help would be appreciated -Standing in front of the vehicle looking at the firewall....inlet to the heater core, is it the tube on the driver side or the passenger side? -Standing in front of the vehicle...

Have started my rebuilt 413 engine. It is still in the brake-in stage. When cold, oil pressure is above 50. As the engine heats up, the pressure begins to drop and settles at about 25 psi at idle (Approx. 900 RPMs). I brought the RMPs up to 2,500 and the pressure went back up to above 50 psi. Is...

Where to start....... The first start-up of the day, with the e-choke engaged is ok. After the car heats up, is when the problems start. I have to use the fast idle cam to get it running. If I try to push the throttlle, the engine dies immediately. I haven't been able to set the timing because...

Have searched the web for info on which plugs I should use, but have not found the answer. 413 CID (not a Max Wedge), both heads are 4006452. I don't know what vehicle the engine came from but it was either a truck or a Motorhome. Summit Racing site says the Autolite ATL-85 will fit. All...

Hey Fellow Members, Would like to ask a question a two part question concerning TDC. However, to keep things from getting too confusing, I will ask the first part now, and the second part after receiving an answer from the first part. It is just a procedure question, so don't want to get 'All...

Hi Members, I plan to fabricate my own brake lines ('70 Challenger). This will include lines from the master cylinder to the proportion valve. Do all the brake lines have the same type of end, whether it be a double or bubble flare? Also, is a double flare and inverted flare the same thing...

Hi Members,.. Came up against a new issue when working on my exhaust system....'70 Challenger, 426 Wedge. Manifold casting numbers are Left: 2951865 / Right: 2899879. Car was originally equiped with a 383/2 barrel. Exhaust pipes are 2.25 dia purchased from an aftermarket supplier. Started on...

Hey there, Members I am having an issue with my instrument lamps (’70 Challenger, Standard Gauges). The light bar, Console gear selector, and Heater switch lights refuse to come one. As a FYI, Dome, Door, and map lights are working. When I put direct power to the orange wire at the ignition...

Anyone plan on attending the Chrysler Perormance West Spring Fling Show & Swap? It's being held This weekend April 15th & 16th at Woodley Park in Van Nuys, California. Might be able to locate some of those hard to find parts you are looking for.

Hey Guys, Trying to track down why I keep blowing the tail light/cigar lighter fuse. With the exception of the reverse light, all exterior lights work fine until I plug in either one of the front side marker lights. I was comparing the aftermarket harness (M&H) to my original and it appears to...

Hi Members, Attached is a sketch of the pivot bracket that attaches to the inside rear of the door......please see the attachments. They are different between the Challenger and Cuda/Barracuda. The ones I have are for a Barracuda but I need those that are for a Challenger. Wanted to know if...

Hello FEBO Members, Wanted to ask. Is there a difference between the location of the window crank mechanism in the Challengers. Seems like I have seen some doors where the shaft of the window crank comes through the lower square cutout, and I have seen some where it comes throug the upper squar...

Hi Members, I am looking for new door and 1/4 glass for a '70 Challenger. Any warnings on which company I should avoid at all cost? Also, any recommendations on where to get the 1/4 glass seal installed on the 1/4 glass? Thanks

Hello fellow FEBO members. Wanted to know if anyone has ever had this issue I am having..........and if so, how did they resolve. I recently re-attached the door to my '70 Challenger and installed new exterior door handle, door weatherstrip, and striker. After getting everything lined up, I...

Does anyone know where I can find the bracket that attaches to the passenger inner-fender and holds the a/c receiver/drier. Had to expand my search cuz this part seems difficult to find ('70 challenger). Thanks

Looking for some advice here. I purchased this flex-plate many years ago for my engine (426 wedge, 440 cast crank, 6-bolts, damper number 3577785 [USE WITH 440 CAST CRANK ONLY], externally balanced, no weights on the converter. Should I grind of the weight welded onto the flex-plate, or leave...

Fellow Members, seeking assistance with this issue. '70 Challenger, 727 trans. I always thought the spacer for the rear tranny crossmember where placed between the tranny and the mount. This page from the Service Manual indicates the spacer is to be located under the the head of the bolt like a...

Does anyone know where I can get a grommet/bushing for an automatic floor shifter. It is indicated in the attached pic. Thanks

Hello Members, I am looking for the center A/C duct that mounts to the heater box and mates with the center and passenger dash vents. Please see pic for identification. Thanks