• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results for query: *

  1. moparmike1974

    WTB Cuda quarter window up-stop

    Im working on two 74 cudas and only have one of the qtr window upstops. So im looking for three of them. Here is a picture, I only need the piece that screws on the brackets and the hardware if you have it. May be the same on challenger but not sure.
  2. moparmike1974

    Need a measurement on E body ASAP. Radiator to rad support height.

    Im in the process of custom fitting an aluminum radiator in my 71 cuda. The radiator bolted in fine but needs to be raised up quite a bit to use the factory shroud. So im looking for a measurement from the top of the radiator support to the top of the filler neck. I measured with the factory...
  3. moparmike1974

    Need help with radiator location

    Im installing an aftermarket aluminum radiator. Its going to require some customization on the mounting brackets but I need to know how much higher does the top tank sit above the radiator support. As I have it installed now the shroud cannot be installed because the fan will hit it. Looks like...
  4. moparmike1974

    Are E body leaf springs not square?

    Im getting ready to relocate my leaf springs and im mocking up the stock suspension to check everything since I replaced the rear rails. I know the frame rails splay outwards, but do the springs as well? Im showing the springs 2.5" wider at the rear. Can anyone get a measurment of the leaf...
  5. moparmike1974

    Is this a 71 E bucket seat?

    I have a 74 satellite with non original bucket seats that appear to be 71 E body. Can anyone confirm? I wasnt sure if there were other seats that look familiar.
  6. moparmike1974

    Who makes these partial frame rails?

    Im trying to find out who manufactures these E body frame rail sections. I know they are US made. I would like to contact them to see if I can just buy the end pieces...
  7. moparmike1974

    Difference in 71 cuda header panel VS 72+

    So AMD lists a different part number for the 71. I cant tell what the difference is comparing it to my 74 header panel. The only thing I can see different is the notches on the ends for the clips are backwards. The center ones are the same. Did AMD make these wrong or is the 71 opposite for a...
  8. moparmike1974

    FOR SALE Rebuilt OEM E body hurst shifter mechs.

    I have three E body shifter mech's available. These are original OEM mechs, not over the counter comp plus shifters. I have two 70 slip in style and one bolt on handle. Reverse levers have the correct "7180" stamp. These have been cleaned, bead blasted, and refinished in black oxide. These were...
  9. moparmike1974

    Problems with AMD firewall install

    Im looking for anyone who has installed an AMD firewall in their cuda or challenger that can give some tips on installing. I started by clamping it from the top and working down. When I got to the bottom there is at lease 1/2" gap to the floor flange. So I pulled it and clamped the bottom and...
Back
Top