Does anyone know of a source for the mounting clips for the hood lip molding for a Challenger T/A? They need to be slightly longer than the standard clips due to the thickness of the fiberglass hood. 3/4" would probably work.
Thx.
I have a 440 block that supposedly came out of a 1970 6 pack cuda. Casting 2536430. production date 11/10/69. I can find no serial number, possibly warrant replacement? Plate by distributor has stamping S 440 and 5 11 2, not familiar with these numbers. Any ideas? Is there a difference between a...
Just got my T/A back from mechanic who adjusted my 6 pack and tuned the engine. He is a retired mopar mechanic who spent much of his life working on these cars. He says however that he is not a transmission mechanic and my car has an issre with the auto trans. He says the car moves about 10 feet...
Finished my T/A a couple of years ago but have been struggling with brake issues and am at my wits end. Problem was soft pedal and brake light coming on when applying brakes. All new brake system components and rebuilt original power booster. In trying to resolve the problem I replaced master...
Looking for column lock out linkage for floor shift 1970 challenger. I have z bar but not certain its the correct one. With linkage adjusted per shop manual, can't get shifter beyond drive. i.e. can't manually shift to second or first gear. Believe I have the correct linkage between z bar and...
Had my 340 six pack rebuilt by Chicago Carburetor. Had some issues with leakage from the bowls since none of the screws were tightened properly. Car now runs fine but front and rear carbs don't open. Both have new vacuum pods. I bought a vacuum pump and when I hook it to either the front or rear...
Finally warm enough to get my car on the road, and now I have a leak in my power steering box. It appears to be the worm gear seal, and I have ordered a new one. My concern is that it is not an intermittent drip, when I run the car and turn the steering wheel it is a fairly steady stream. I saw...
Hooking up my linkage, 1970 Challenger T/A, but my transmission does not have the gear shift connector. I see some on ebay but not sure what the 1970 should look like. I assume I need 2? One to attach my floor shifter linkage rod, and another one going to my steering wheel lock out rod? Or do...
So I am finishing up a 1970 Challenger T/A. The car came with a rebuilt motor and transmission, but did not include a torque converter. In talking to a supply shop they are telling me that they can't possibly supply a torque converter without the original one since the balance will likely not be...
Hello, just joined today, can't believe I didn't find this site sooner. Located in northeast Wisconsin, and have been a mopar fan since my first 1970 Challenger that I bought in 1973. Drove that car for over a 180,000 miles with only one motor change out. Pretty good for back in the day.
I have...