Search results for query: *

Got the engine bay painted. Project was stalled for 2 years due to a BAD shop that defaulted on my contract. Found a great guy locally who is as crazy about Mopars as most people on this site (Positively Meant!) :). Putting motor in from up top as my fully rebuilt suspension is in...

Hi gang - getting ready to install 340 and 727 into my 71. Engine bay painted and I will get it all mechanically functional then send back for final paint......looking for the best radiator for the $ to put in this beast. I know the thermostat should be 180 degrees.....let me know! Todd J.....

Hi gang. I have a 71 Challenger. Hard Top. The hood, trunk, and front quarters are all new AMD metal. And Valences. They are all primed and ready for final sanding. Rear quarters need to be blocked. Other than that the car is ready for paint. I have the car at a shop after my original guy...

Team is there a good video out there that shows reinstalling a 340 and 727 into a 1971 Challenger? I already have the K frame and front end installed. I recall jacking the tranny to pull the old 318....that was 3 years ago LOL.....any tips and tricks are welcome. I saw a lot of stuff on You...

Using a kit from American Autowire I have rewired all the dash switches and gauges in my '71 Challenger. Dash reskinned by Just Dashes in El Paso. Used to be brown. Painted the plastic and metal satin black. Aftermarket battery powered clock fits right in. I labeled everything. Even the...

PART Price Rear Bumper 100 Front Bumper 100 Rear Valence New 150 Rear Valence Used 75 Front Valence 75 Sheet Metal 100 Shop Mount Wheels for E Body 150 Interior Kick Panel 50 Interior A Pillar Cover 50 Chrome Mirror Driver 75 Chrome Mirror Passenger 75 Shifter 50...

Stripped the rear left. Car had partial quarters welded on. I made the mistake of removing ALL the bondo. So now I am learning body work! I got the dura blocks and all the foam goodies. Have watched a LOT of You Tube. Got my guide coat. And arms like HULK HOGAN from sanding! Shooting for...

This was major surgery.....metal patches to fill rot around the lower half of the Cowl. Especially around the air chimneys. Had to rebuild those. Used a skim coat of Bondo to smooth things out but it's 100% all metal.POR 15 over everything. I have a new Cowl top to go on. Doing a million...

Hey gang - who sells these - I have been searching all over on line for over an hour! Thanks - Todd #71 Challenger 2 Door 340 CID

Hi gang. Still plugging away on my 71 Challenger. I have cut off the top half of the Cowl to repair all the rot and rust on the bottom half. I have a new top half ready to go and install. I see the holes for the windshield chrome and referenced . Are the fasteners self tapping? Or have a...

Question gang - The three piece automatic transmission console kit from AMD - - what is the front bracket with the 2 bolt holes for? I got the middle one for the shifter (obviously) and the rear for the 2 screws in the compartment......can't find a good pic that defines what the front one is...

Need the first 18" of a good frame rail. From Rear Seat to incline over the axle. Todd J

Need to patch the end of a partially restored rail ahead of the axle on a 71 challenger. Will take a good used piece. DRIVERS side - Todd in MASS

Previous owner put these in. First $500 plus shipping takes them. They are in good shape with one blemish on the driver's seat.

This was added into a column shift car with the 904 tranny....it's in good shape. $200 Plus shipping. I have the shifter too...not a slapstick. Tan Shifter Handle. Todd J

Nice rear seat. I am converting to Black interior.

I live in North Central Mass. Started as a 318/904 car. Will become a 340/727 car to be painted the lime greet and an R/T clone. Tips and Suggestions welcome. I have the motor and tranny all ready to go. Converted drums to disc in the front. Rear is a FORD 9" 4:11. I will need a new...

Hi gang...new at the Mopar thing. I have a '71 Challenger on the operating table in my garage. Came with a bone stock 318 and the 9xx tranny...have a hopped 340 and 727 ready to go. In the midst of body stripping and POR 15 treatment. Rust is manageable. I need a drivers side front fender...