Search results for query: *

Hello! I'm looking for this part, but I can't seem to find it. The name of the part seems to be "rear run and retainer". This is a rail that supports the rear of the quarter window, but the parts for the passenger seat side were not included. Similar to the driver's seat, there is also a stay to...

Hello! I'm currently restoring a 70challenger. We are proceeding with the restoration mainly on the rear part, but I have a question for you all. As shown in the photo, there is an approximately 3/16 height difference between the left quarter panel and trunk lid panel. The quarter panel is...

Hello! Let me questions. I'm trying to order new wheels and tires for my 70 Challenger, but the rear seems to be fine, but I'm concerned about the front wheels and tires. The wheels and tires you are trying to install are ・American Racing VN615 VN6155865 15×8 Backspace 3.790 in American...

hello! I have a question about Deck Filler Panel Center Support. I'm currently installing a trunk lid torsion bar, but I'm wondering how it fits in the center support hook. I would be happy if you could show me a picture of your car. By the way, the center support is completely different from...

hello! I have a question about the trunk decklid. I removed the spring nut attached to the decklid hinge during restoration and lost it. Therefore, I installed a spring nut that can be obtained in Japan, but the groove is shallow and the hinge shakes. The inner diameter of the spring nut is...

hello! I purchased a body gasket at the summit, but there are unknown seals and gaskets. Where are the gaskets and seals shown in this photo used? thank you for reading it until the very end!

Hello. I'm currently repairing the rear of the vehicle, but I'm having a hard time because the shape of the quarter panel doesn't fit. As shown in the photo, there is a gap with the door panel and a gap with the rear glass. The part where the yellow masking tape is visible is out of...

Hello! I am trying to replace the downflow (genuine?) Radiator that has been installed so far because it has cracked. We are planning to be cool 63177 (Crossflow, Overall Width (in): 33.000 in.Overall Height (in): 19.000 in.Overall Thickness (in): 3.000 in.) The question here is that if you...

Hello! Currently, we are replacing and repairing the body panel. So the question is, how do you glue the body panels other than the frame? I scraped the panel adhesive surface to roughen the skin, and I was thinking of bonding with 3M panel bond and spot welding. However, in 100V spot...

Hello! I replaced the brake booster and master cylinder to change the brake system. I tried to install it, but there is a gap of 1 inch or more between the brake booster and the master cylinder. It is not enough (approximately 0.2 inches) to fully adjust the rod of the brake booster. There...

I'm looking for this brake hose. I bought the front brakes upgraded to disc brakes, so I don't know the previous information. If anyone knows, please let me know! For reference, here are photos of disc brake calipers and brake pads. The length is approximately 13 inches.

My 70 Challenger has two fuel pipes running through it, one from the fuel tank to the fuel pump and the cab, but the other pipe isn't connected anywhere. I am planning to install a new pipe. Is this pipe unnecessary? Please give me some advice. thank you for reading it until the very end!

Hello! We are currently restoring the body. I plan to replace all the outer panels as well, but I found something like this when temporarily fixing the panels. Is this something like a magnet? Please give me some advice! thank you for reading it until the very end!

Hello! The roof has come off while the body is being restored, and we will replace the quarter panel, speaker panel, trunk floor, left and right doors, etc. Is it necessary to reinforce the frame with pipes like this picture when working from now on? We plan to work on the ground without...

Hello! I'm asking about the exhaust bracket. The left side of my car has a bracket that looks like it was made by myself. It seems that such a part is on sale as an after part, but in the case of this part, do you make a hole in the floor and sandwich it from the inside and outside to install...

Hello! Thank you for your advice before this time. The roof was successfully removed yesterday. After removing it, it was in a good condition to some extent, but the stay on the side mounting part was severely rusted. I am thinking of replacing it, but when I search AMD, I see such a part...

Hello! My Challenger also has considerably rust proceeds. I'm going to replace all the outer panels, but I have a question for you. I'm also replacing the roof and quarter panel, but don't know where the seam between the roof and quarter panel is? Where should I cut? Currently, the spot...

Hello! How are you guys? There is a lot of coronavirus in the world, but in Japan it is still free to go out on a voluntary basis. Wear a mask when you go out. According to TV and SNS information, it seems that California is prohibited from going out except for buying food, but what is the...

Hello! About the cost of riding an old American car in Japan. First of all, tax (every year) just by owning a car → about $ 850 to 360 small block big block → $ 1000 car inspection fee (once every two years) → about $ 2000 car insurance (every year) → about $ 400 gasoline Price...

Nice to meet you. The name is Ryo. I'm doing restore work in Japan. Please forgive me for being the first question and speaking in English using the app. I have a question about the brake system, but now I have the original (maybe) brake system, but I'm thinking of replacing the master back...