• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

1970 Barracuda unfinished project car

Status
Not open for further replies.

wingman

Active Member
Joined
Nov 9, 2014
Messages
44
Reaction score
18
Rating - 0%
0   0   0
Contact seller
1970 Plymouth Barracuda unfinished project car. Original Lemon Twist color with black interior. Have fender tag, no build sheet. 318 Automatic car. 1970 dated Non original engine. Turns freely. Hasn't been run in a couple years since the car was started on. All the hard expensive bodywork has already been done. Professionally installed new full left and right 1/4 panels, outer wheelhousings, left dropoff , rear taillight panel and 1 piece front floor pan. All welded in, ready for seam sealer. 1/4 panels seams at roof pillar and rockers are finished off. All other body panels are very nice requiring very minor body work. No other sheet metal needs replaced. Couple very small holes in the trunk both about the size of a nickel, One small holes on the lower left front fender about the size of a quarter and a couple small holes at the hood hinge area where they typically rot. Cowl and firewall are solid.Solid frame rails and torsion bar crossmember. New reconditioned dash pad from Ultimate Rides in car. Needs carpet, headliner, seat covers. I will also include a used ralley hood with the car, no inserts. Car is priced very fairly @ 13,900.00. Considering the fact there has already been close to 7,000.00 put into it for the new dash, sheetmetal and labor costs to install the sheet metal, that means your really only paying 6,900.00 for the car. That's a great deal for a 70 Barracuda not needing any other sheet metal replaced! Just have too many projects going on at the same time and need to sell off a couple cars to continue finishing the other projects that are currently painted and further along. Please, serious buyers only. No trades. Defeats the purpose of selling this.



FENDER TAG INFORMATION
M91 N95 R11 26 END
FY1 C16 C55 G33 H51 M21
FY1 H6X9 000 909 016695
E44 D31 BH23 GOE 103247

P1010052.jpg


P1010054.jpg


P1010055a.jpg


P1010053.jpg


P1010057.jpg


P1010056.jpg


P1010051.jpg
 
Last edited:

wingman

Active Member
Joined
Nov 9, 2014
Messages
44
Reaction score
18
Rating - 0%
0   0   0
Actually it started out as a Studebaker dealership built in 1923. They also sold Buicks. Pierce Arrows, AMC's and a few other carlines over the years. Don't think it was ever a Chrysler dealership though. Dealership closed around 1981. I bought the building years ago and use it for my business, Muscle Car Pit Stop so you may have been in the store at one time for some AMD sheet metal, so it may look familiar to you
 

wingman

Active Member
Joined
Nov 9, 2014
Messages
44
Reaction score
18
Rating - 0%
0   0   0
I've added the fender tag information on the listing. Hope that helps
 
Status
Not open for further replies.
Back
Top