• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

FOR SALE 1974 Challenger 360 auto restoration started

Status
Not open for further replies.

wingman

Active Member
Joined
Nov 9, 2014
Messages
44
Reaction score
18
Rating - 0%
0   0   0
Contact seller
1974 Challenger 360 Automatic. Original color is deep burnt orange, with white interior, white vinyl top, factory A/C car. Total production on all 74 Challengers is around 16,000 units. Out of them approximately 6,000 were equipped with a 360 engine making this a scarce low production vehicle. Restoration work has been done on the bad areas of the body. Professionally installed is a new front floor pan, firewall, cowl panel, trunk floor, left trunk drop off, right trunk drop off, left outer wheel housing, right outer wheelhousing, rear window filler, trunk lid, left 1/4 skin, right full 1/4 panel. Doors/fenders are rock solid and will NOT need any rust repair. Car really doesn't need much more to be ready to paint. Frame/torsion bar cross member and rest of floor are also solid. there is a 70 style grille assembly previously installed along with 70 style bumpers and bumper brackets which really gives the car a much nicer appearance. I do have the original grille, headlight bezels, bumper guards,bumper brackets and hood edge front moulding that were original to the car but don't have he fiberglass header if you decided to keep it a 74 and sell off the 70 grille.. I don't know anything about the engine except it has not been on the road for years but still does turn freely. Will need seat covers and carpet. Headliner is not tore up but dirty. May clean up. I do have some other pictures of the parts that were removed from the car that go with it. This is a really nice solid Challenger for someone who has some time to continue on it and finish it up. Just got too many projects and too much going on right now and don't for see getting back to this car anytime soon, so no sense of it sitting. Car is priced very fairly for all that has already been done and what it is. There has been close to 12,000 invested in new sheet metal and labor costs for installation alone. Car is priced fairly at 13,995.00. Car is located near Pittsburgh, Pa

4823E2A5-8BE1-4A7B-A023-07355A41B30B.jpeg


61CCA922-808E-4618-AA66-EAB1F2A68948.jpeg


B8CF9592-E83A-4B09-86A7-5231DC946066.jpeg


388E5AE1-4B89-42D3-8206-4D513F8C0F1A.jpeg


F91CA66A-892A-4631-8C1F-68E89A3A2963.jpeg


50767815-DEC2-4308-80CF-7AFE24CBA2C4.jpeg


C3368B80-8487-4707-95AF-E883390EB5BA.jpeg


3B04529C-9E22-4897-8A23-251A2991B1D6.jpeg


1819E360-7DB4-4BEC-AF12-93F1A0AE57C2.jpeg
 
Status
Not open for further replies.
Back
Top