WTB Electrical and Small Items - '73 Challenger

[moparmaster]

Parts needed:

I need a wiring harness for all the connector bodies. I bought a Painless harness and don't have connectors!

Specific items from the harness needed:

Wiper switch connector.
Cigarette lighter and connector.
Glove box light, switch, and connector.
Headlight switch connector.
Panel dimmer and connector.
Brake switch and connector. Also need the mount.
Side marker sockets.
Brake/turn, and reverse sockets.
License plate light and connector.
Center console lighting and reverse switch connector.

Non-rallye dash radio bezel plastic and the plastic piece above the dash. Doesn't need to be wood grain.
Center A/C vents.
Ash tray handle (Dash ash tray)

Thanks!

 

[DetMatt1]

FOR SALE - The great used wiring harness sale

 

[fk5bird]

Good morning send me a number or E mail and will send you some pictures of what I have.

 

[moparmaster]

[email protected] or 2148936733. Thanks!

 

[fk5bird]

Good morning. Got in late last night will get them to you when i get to the shop.

 

[Chryco Psycho]

Painless is just a name , it is far from Painless to install
Evans & M&H through Year one have complete harnesses with all the plugs do if you can return the Painless harness it is better to go with one of the others .

 

[moparmaster]

Painless is just a name , it is far from Painless to install
Evean & M&H through Year one have complete harnesses with all the plugs do if you can return the Painless harness it is better to go with one of the others .

The shop I used bought the Painless harness about a year before the American Autowire harnesses came out. We have it mostly installed at this point and modified for the EFI, MSD, etc. Just a few connectors here and there to finish it out.

If I could go back in time......

 

[moparleo]

Sometimes you have to...

 

[michael bucklew]

Parts needed:

I need a wiring harness for all the connector bodies. I bought a Painless harness and don't have connectors!

Specific items from the harness needed:

Wiper switch connector.
Cigarette lighter and connector.
Glove box light, switch, and connector.
Headlight switch connector.
Panel dimmer and connector.
Brake switch and connector. Also need the mount.
Side marker sockets.
Brake/turn, and reverse sockets.
License plate light and connector.
Center console lighting and reverse switch connector.

Non-rallye dash radio bezel plastic and the plastic piece above the dash. Doesn't need to be wood grain.
Center A/C vents.
Ash tray handle (Dash ash tray)

Thanks!

better off buying a new harness for the car---try Instrument Specialities or Classic Industries..i bought a new harness because i went to the rally dash every thing hooked right up painless harness--waste of time and money and more pain

 

[BSG]

I used the american auto wire as well lots of work, lots of soldering. Would never use them again.