• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Hemi Hydraulic Roller Lifters

Mike H

Member
Joined
Jun 14, 2020
Messages
10
Reaction score
6
Has anybody used Johnson Hydraulic Roller Lifters?
They have two part #'s, 2312BBR and a "reduced seat height lifter" #2311BBR.
 

fasjac

Well-Known Member
Joined
Dec 27, 2019
Messages
2,238
Reaction score
1,126
Location
Arkansas
I too would be interested in any comments on this subject.
Who would you source the Johnson from? I leaning toward Lunati bushes but, interested in the reduced seat height. Just doing homework.
As I’m putting a list together for a roller motor.
 

Mike H

Member
Joined
Jun 14, 2020
Messages
10
Reaction score
6
Sorry for the long delay. From everybody I spoke with at 3 racing engine shops and 2 dyno shops here in Calif, Johnson was at the top or at least one of the top 2 lifter manufacturers mentioned by all. So I went to Johnson's website under venders, and was not so pleased, so I called Johnson and asked which vender had them in stock. And they arrived in a few days.
They came from Marine Kinetics, PO box 353, Canandaigua, NY, 14424
Part # JL2311BBR. $1,162.94 freight included. They look good..
Have not assembled the engine yet as I'm still waiting on the machine shop and parts.
 

6PKRTSE

Well-Known Member
Joined
Feb 3, 2010
Messages
777
Reaction score
367
I have bronzed bushed lifter bores with Isky roller lifters in my Hemi with over .800 lift street driven for 5 seasons now with no issues and plenty of 1/4 mile passes. I will tear it down probably this winter for inspection and a refresh.
 
Back
Top