Loose side mirror

[BAD FSH]

I have a 73 Cuda with a loose drivers side mirror. What is the process of tightening the housing of the mirror to the base? I have taken the mirror off and can't find a set screw to tighten the housing. Sounds simple I know but I need HELP!

 

[Adam]

Not sure about a 73, but on a 71...Looking up, into the base, you should see some Phillips screws.

 

[BAD FSH]

Not sure about a 73, but on a 71...Looking up, into the base, you should see some Phillips screws.

Thanks, I will take a closer look

 

[BAD FSH]

Thanks, I will take a closer look

Not sure about a 73, but on a 71...Looking up, into the base, you should see some Phillips screws.

You were right! I removed the mirror and found the 2 screws tucked behind the mirror adjustment cables. Appreciate it