• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

new member

michael bucklew

Well-Known Member
Joined
Aug 24, 2019
Messages
291
Reaction score
38
original owner of 71 challenger, about 80% restored----small block--punched .30 over 8 3/4 294 gears g5 blue w/white vinyl top.....having problems installing head liner, need help----thanks ya'll m, bucklew
 

Adam

Well-Known Member
Joined
Dec 25, 2012
Messages
1,645
Reaction score
698
Location
Washington
C65AAD20-C704-4269-B21F-073852728D31.jpeg
Welcome.

Headliner install sucks, but is doable. Get lots of small spring loaded clamps. Headliner adhesive, and test fit your bows in the roof, and trim the headliner close to mock up its final size prior to starting; use the clamps for this..
ANVIL 3/4 in. Mini Spring Clamp-99693 - The Home Depot

Set the headliner in the sun to get warm & smooth wrinkles. Work from back to front; make sure you have the little anchor wires for the rear most headliner bow (they go in the the forward facing holes) Glue, stretch, and clamp as you go forward. Mark/make holes for the suit hooks, shoulder belt bolts, and dome light as you go. Take a break when your arms get tired.... good luck.
 
Last edited:

moparleo

Well-Known Member
Joined
Oct 17, 2011
Messages
6,938
Reaction score
1,726
Location
So. Cal. Riverside area Moreno Valley
:welcome: aboard. I am going out on a limb and assume that the roof is already installed... Follow Adams lead. Make sure that you get the proper headliner type for the bows that you have. The 4 bow and 5 bow are different and will not interchange.
 

michael bucklew

Well-Known Member
Joined
Aug 24, 2019
Messages
291
Reaction score
38
View attachment 62771 Welcome.

Headliner install sucks, but is doable. Get lots of small spring loaded clamps. Headliner adhesive, and test fit your bows in the roof, and trim the headliner close to mock up its final size prior to starting; use the clamps for this..
ANVIL 3/4 in. Mini Spring Clamp-99693 - The Home Depot

Set the headliner in the sun to get warm & smooth wrinkles. Work from back to front; make sure you have the little anchor wires for the rear most headliner bow (they go in the the forward facing holes) Glue, stretch, and clamp as you go forward. Mark/make holes for the suit hooks, shoulder belt bolts, and dome light as you go. Take a break when your arms get tired.... good luck.
 

michael bucklew

Well-Known Member
Joined
Aug 24, 2019
Messages
291
Reaction score
38
put in 5th bow with the bow retainers but the bow hangs down quite a bit. i used the longest bow , installed into holes in sail panel
 
Back
Top