• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

SOLD Rear Brake Backing Plates 11 x 2 1/2" Inch, Levers & Struts, Spring Hardware.

Status
Not open for further replies.

hemi71x

Well-Known Member
Joined
Apr 25, 2014
Messages
673
Reaction score
64
Location
Rancho Cordova, CA.
Rating - 100%
1   0   0
Contact seller
My current, latest, pair that i now have for sale.

These are a pair of 11 X 2 1/2 inch rear brake backing plates that are used on car, van, pick up truck, passenger car Dana 60, 9 3/4 axles, and 9 1/4, 8 3/4, and even the 8 1/4 inch axles.

I just pulled these off a big, late 1980's Dodge Van that had a 9 1/4 inch rear end in it, so i am fully aware what size brake shoes they are for, and what vehicle they came off of.


Plates are not rusted, and i feel these are one of the best pairs of backing plates that i have pulled off a donor vehicle for resale.
Hand scrubbed cleaned in the solvent tank, to clean them all up, of all the grease and grime.
Then soaked everything out in a pail of Evaporust, to bring them back to like new condition, the day they were made.
Wheel cylinders are excellent condition.I opened them up and inspected them, honed them out, installed new kits, painted them up, put them back together.
They are 15/16 inch diameter.
Plates are ready for installation, and to be put back into use


These are a set of parking brake levers and struts for 11 inch rear Drum Brakes, that are used on cars, trucks, vans, during the later 70's, 80's, 90's, 00's, and well into the 10's.
The levers are the "hook type" design that install onto the shoe with the little slot in the shoe itself.
Can be used on any 1960's and 1970's vehicle by just using the shoes with the slot, in the side of the brake shoe.
These parts were just removed from a late 80's Dodge Van, donor vehicle.

Levers & struts can be used on any 2", 2 1/2", 3", width brake shoes.

These are all the self adjusters, cables, springs, all the parts used on the rear brake backing plates, for the 11 x 2 1/2 inch brakes.
The parts stores commonly refer to these items as the brake "hardware package"

$95.00 for the backing plates, and Wheel Cylinders
$40.00 for the levers & struts.
$20.00 for the hardware package.
$155.00 for all the parts, pictured.

The levers & struts, and hardware package will be sent USPS for $8.00 each.
The backing plates, and everything will just fit in a USPS box, so i can send out for $23.00, with a signature delivery on the package.

Payment will be by Pay Pal, with their 3% fee added on, or no fee, if you pay me thru friends or family. Your choice on payment method.

Send me a pm, if your interested, and i can give you the rest of my information.
Thank's a lot.
Jim V.

Van Backing Plates #5 003 (Small).JPG


Van Backing Plates #5 001 (Small).JPG


Van Backing Plates #5 002 (Small).JPG


Van Backing Plates #5 005 (Small).JPG


Van Backing Plates #5 006 (Small).JPG


Van Backing Plates #5 008 (Small).JPG


Van Backing Plates #5 009 (Small).JPG
 
Last edited:
Status
Not open for further replies.
Back
Top