• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

SOLD **REBUILT** 1970 WIDE MOUTH Kelsey Hayes Disc Brake Caliper & Parts.

Status
Not open for further replies.

hemi71x

Well-Known Member
Joined
Apr 25, 2014
Messages
673
Reaction score
64
Location
Rancho Cordova, CA.
Rating - 100%
1   0   0
Contact seller
I made an executive decision to rebuild this caliper, and now put it up for sale, in rebuilt condition.

This is whats known as a 1970 "WIDE MOUTH" Kelsey Hayes disc brake caliper, that was a one year design, that was used on the 1970 B & E body line of cars, and possibly a very early build 71, until the supply of these calipers was used up on the assembly line.

This is a LEFT side, drivers side caliper, with calipers towards the front of the vehicle.

This caliper has the correct positioner pins, positioners, anti rattle spring, except for one "positioner" which is a replacement 1971 up, style.
Suspect that one got replaced the first time that this caliper got a brake job in it's lifetime.
Just letting you know about that.

You also get the caliper mount, to the spindle, and the old pads that i got along with this caliper, for you to match up, when you purchase pads of whatever brand that you prefer.

Date code on the caliper is 117 0
April 27, 1970

Everything was scrubbed clean in the solvent tank, soaked out in a 5 gallon pail of Evaporust, painted with VHT high heat paint, cast iron grey.


I only have this one caliper.
Don't ask about the other side.
Wish i did have it's mate.
Only could find this one, in a stash of parts, in an old barn.

Selling everything at $300.00, plus $22.50 for the mailman, in an insured package, and a signature delivery at your end.

Serious buyers, send me a pm thru this forum, and i will get back with you.
Thank's a lot.
Jim V.
hemi71x



REBUILT 1970 KH Calipers 001 (Small).JPG


REBUILT 1970 KH Calipers 002 (Small).JPG


REBUILT 1970 KH Calipers 003 (Small).JPG


REBUILT 1970 KH Calipers 005 (Small).JPG


REBUILT 1970 KH Calipers 007 (Small).JPG


REBUILT 1970 KH Calipers 009 (Small).JPG


REBUILT 1970 KH Calipers 010 (Small).JPG
 
Last edited:

hemi71x

Well-Known Member
Joined
Apr 25, 2014
Messages
673
Reaction score
64
Location
Rancho Cordova, CA.
Rating - 100%
1   0   0
EDIT EDIT.
Please take note.

This is a RIGHT SIDE, PASSENGER SIDE, Caliper.
Bleeder screw must be in the highest point in caliper mounting, on the spindle.
With calipers mounted towards the front of the vehicle, in the stock location.
My initial description was in error.
My bad.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
Last edited:
Status
Not open for further replies.
Back
Top