email4eric
New Member
I have a 1971 Cuda with a non numbers matching engine installed. The engine is a 1974 440 with a single Carter TQ carb. I have a new Edelbrock Performer 1411 and 2697 adapter plate setting new on the shelf from another project in my car collection. I want to replace the TQ with this Carb. The problem is that with the adapter plate and carb installed it runs great, but the additional combined height of the carb (+1/2 inch) and adapter plate (+1/2 inch) the stock air cleaner won't fit under the hood. Short of rebuilding the TQ, any other suggestions.
Thanks,
Thanks,