raffaplymouth
Member
- Joined
- Jan 19, 2012
- Messages
- 9
- Reaction score
- 0
Hello Guys ! im Raffaele .. a New Member from Italy ...
i have a 1970 Barracuda 4 speed hot street and strip car , i have buy 10 years ago in Swisse .. lot of work in these years ..
my combo is :
Car weight 3700 pounds
440-496 stroker kit 440 source 4.15 stroke
Ross pistons .040 flat top CR 11.80:1
Eddy heads 84cc ported and milled .025
Lunati roller cam 60334 .600 lift + comp cams roller lifters
harland sharp 1.6 roller rockers
m1 intake
950 hp holley
4spd a833
centerforce dual clutch
8 3/4 rear axle + Detroit posi + 4.10 gear
cal tracs with multi leaf
28 - 10.5 drag tires
little no2 spray Edelbrock Nitrous
my last time ( 6 month ago, with no Cal Tracs and 3.55) is 11.40@126 mph
now my engine is disassembled for refreshing , burning oil and i have broken a roller lifters with no damage block ... this year i would arrive at high 10s without spray!!
Accept any advice , and I hope I have put in the right discussion ...
Thank you Guys !!
i have a 1970 Barracuda 4 speed hot street and strip car , i have buy 10 years ago in Swisse .. lot of work in these years ..
my combo is :
Car weight 3700 pounds
440-496 stroker kit 440 source 4.15 stroke
Ross pistons .040 flat top CR 11.80:1
Eddy heads 84cc ported and milled .025
Lunati roller cam 60334 .600 lift + comp cams roller lifters
harland sharp 1.6 roller rockers
m1 intake
950 hp holley
4spd a833
centerforce dual clutch
8 3/4 rear axle + Detroit posi + 4.10 gear
cal tracs with multi leaf
28 - 10.5 drag tires
little no2 spray Edelbrock Nitrous
my last time ( 6 month ago, with no Cal Tracs and 3.55) is 11.40@126 mph
now my engine is disassembled for refreshing , burning oil and i have broken a roller lifters with no damage block ... this year i would arrive at high 10s without spray!!
Accept any advice , and I hope I have put in the right discussion ...
Thank you Guys !!