Search results for query: *

I have a 1971 convertible with the stock drum brakes in the front. I went to mount my new Cragar S/S mags on the front and because of the large fins on the drum the rim will not mount flush to the drum. I can put a 1/2 spacer in to shim out the drum but am having trouble finding replacement...

In my 1971 Challenger convertible, it was a stock 318 with a 3 speed. I have now gone to a 340, mild rebuild and was looking to put a 4 core 26 inch radiator in for maximum cooling, but it seems the mounting plate will only accommodate a 21 inch. Were there 2 different radiator mounts put in...

I have just put together my 1971 Challenger with a mildly built 340. I replaced the old radiator cap with a new 16lb cap. I am having trouble getting the neck to seal to the intake manifold. I used a quality sealer and gasket but when the system pressurizes, it leaks through the gasket and up...

I am rebuilding a 71 Challenger convertible and need a picture of the parking brake cable routing. I have the cable run but can't connect the center hook on the cable. I have the long cable that goes from one side of the car to the other with a bracket that pulls from the parking brake cable...

I am in need of 318/340 main caps for my 340. The 3rd and 5th cap are not within tolerance while doing the alignment boring. Other than spending big bucks for aftermarket, does anyone have some used mains. My machinist told me to get a few of each so we can pick through them for the best fit...

1971 Dodge Challenger with a torsion bar that is giving me fits. The driver's side came out with a few taps of a hammer, but the passenger side won't budge. The chassis book says don't heat the torsion bar but can I heat the end to see if that will break it loose? And does anyone know where I...

I have replaced the passenger side quarter panel on a 1971 Challenger convert and have acquired a NOS flip top gas cap. Does anyone have a picture or two of how this is mounted to the filler tube and the quarter. Thanks

Does anyone have any information on this intake manifold, how would it be for street use and what size carb would fit on here. I have a 340 4 speed that I will be putting into a 71 Challenger Convert and would like to get good performance and gas mileage. Thanks

Used 1971 Challenger leaf springs from a convertible, replacing them with new. Also have the pair of shackles. $150.00 for the pair or OBO Will not ship. p/u only, Northern Illinois Mark

Does anyone have a suggestion for a shop to repair my clock in the Chicago area? I have my dash out and I would like to have it repaired. Thanks!

LH Front floor pan for 70-74 E body and 71-74 B body This pan is from the firewall to the front of the seat, does not go under the seat. Brand new, not needed. $90.00 obo p/u the best.

I am just begining the rebuilding of a 1971 Dodge Challenger convertible and have chosen to tackle the front end and brakes along with an inner fender well. Is there a good place to acquire a complete front end rebuild kit, complete with bushings, new cam bolts, ball joints, etc?