Some small block engine parts for sale

[btceng]

Since I have decided to go back with a lot of new parts on my current build, I have several items that may interest some of you.

3 sets of sb heads: J heads with 2.02/1.60 valves and comp springs $400, J heads stock 1.88/1.60 disassembled $200, set of stock 318 heads that need total rework $100.

360 4 bbl intake stock iron $100

Reconditioned 340 cast crank .010 under fresh from the machine shop $150

Set of reconditioned rods from a 340 fresh out of the shop $150

Just seeing if there is any interest out there, so I will provide more info and pic as needed. Thanks.

 

[challenger6pak]

Pics seem to generate interest.

 

[btceng]

Agreed. Need to get it all together in one spot and snap a few. I'll try to do it soon.

 

[btceng]

Agreed. Need to get it all together in one spot and snap a few. I'll try to do it soon.

So here are a few pics. Not shown are the rods and the large valve J heads. They are still at the machine shop.

 

[btceng]

This stuff is heavy so shipping would be and issue. Would be at actual cost. Not advertised locally yet so you guys get first crack.

 

[btceng]

Here's the pics of the 2.02/1.60 J heads and reconditioned rods. Notice the light polishing on the heads and the new Comp Cams springs and seals. They would benefit from a valve job and could use new guides but should work as is. They are clean and have a 62cc chamber. This is all that I know about them and the opinion comes from my machinist. We were going to use them but the smaller chamber doesn't work with my deck height and piston. Trying to stay under 10:1.

 

[btceng]

Nudge. Nudge. Still have em.