• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

SOLD 1970 Barracuda Project Car. No Drivetrain

Status
Not open for further replies.

wingman

Active Member
Joined
Nov 9, 2014
Messages
44
Reaction score
18
Rating - 0%
0   0   0
Contact seller
1970 Barracuda up for sale. Nice project car. Profesional restoration work has been started on the car. All the floorpan work from the cowl to the front of trunk floor is done. There has been a new AMD full front floor pan installed along with a new AMD torsion car crossmember. Its all welded in and floor seam sealed. Still needs trunk floor replaced. I have a 2 piece AMD trunk floor that is included with the car. New left front AMD inner fender professionally replaced also. Engine bay is all cleaned up and painted. If you want to keep it red then its ready to drop an engine in. Otherwise a quick scuff and recoat color of your choice. Nice doors, hood and tailight panel. Decent useable fenders. Nice uncracked grille assembly. Needs some rust repair on the roof and trunk lid edge. Originally a vinyl top car. Right 1/4 panel and outer wheelhousing will need replaced. Left 1/4 I think can be patched. Dash is decent. Seats are not torn up. Missing some interior pieces. Originally a factory 318 Auto A/C car. Car has no drivetrain. I do however have a 318 with a 904 automatic tranny that I can give with the car at no extra charge if someone wants to put a 318 back in it. Its just sitting here and I have no use for it. 12,900.00.
IMG_20161028_134201.jpg


IMG_20161028_134421.jpg


IMG_20161028_134435.jpg


IMG_20161028_134451.jpg


IMG_20161028_134507.jpg


IMG_20161028_134555.jpg


IMG_20161028_134608.jpg


IMG_20161028_134718.jpg


IMG_20161028_135317.jpg


IMG_20161028_135515.jpg
 

mofish

Active Member
Joined
Sep 24, 2015
Messages
25
Reaction score
0
Location
Chilliwack, BC
Rating - 0%
0   0   0
1970 Barracuda up for sale. Nice project car. Profesional restoration work has been started on the car. All the floorpan work from the cowl to the front of trunk floor is done. There has been a new AMD full front floor pan installed along with a new AMD torsion car crossmember. Its all welded in and floor seam sealed. Still needs trunk floor replaced. I have a 2 piece AMD trunk floor that is included with the car. New left front AMD inner fender professionally replaced also. Engine bay is all cleaned up and painted. If you want to keep it red then its ready to drop an engine in. Otherwise a quick scuff and recoat color of your choice. Nice doors, hood and tailight panel. Decent useable fenders. Nice uncracked grille assembly. Needs some rust repair on the roof and trunk lid edge. Originally a vinyl top car. Right 1/4 panel and outer wheelhousing will need replaced. Left 1/4 I think can be patched. Dash is decent. Seats are not torn up. Missing some interior pieces. Originally a factory 318 Auto A/C car. Car has no drivetrain. I do however have a 318 with a 904 automatic tranny that I can give with the car at no extra charge if someone wants to put a 318 back in it. Its just sitting here and I have no use for it. 12,900.00.View attachment 34573

View attachment 34574
View attachment 34575

View attachment 34576

View attachment 34577

View attachment 34578

View attachment 34579

View attachment 34580

View attachment 34581

View attachment 34582
Location?
 
Status
Not open for further replies.
Back
Top