SOLD Extra Parts

[challenger6pak]

These are for the door panels on a B body. They are in very good condition. I am asking $15 ea.

 

[challenger6pak]

These are original B body door sill plates. They need polished. I am asking $20 for them

 

[challenger6pak]

This moulding is off of a 1966 Coronet. It needs rechromed. It is straight with only surface rust in spots. I am asking $15

 

[challenger6pak]

This set of rear mouldings is in good condition. They have a few scratches from being stored on shelves. The drivers side lower moulding has two dings on it. The rest of the mouldings are ding and dent free. I am asking $90 for the set.

 

[challenger6pak]

This set of windshield mouldings need a little restoration. One has a smooth dent in it. It is an easy dent to repair. I am asking $50 for the mouldings.

 

[challenger6pak]

This set of Challenger Rear Interior Mouldings are in very good condition. They have never been sanded. The have no rust outs. All they have a surface rust. It is more a discoloring condition. All they need a sprayed with a rust remover and repainted. They grain will stay like new on them. Most of these have been sanded and repainted. The grain is smoothed off when this is done. I am asking $100 for them. They are hard to find in this condition.

 

[challenger6pak]

These side mouldings are in very good condition. The grain is good and they have no rust. I am asking $20 ea for them.

 

[challenger6pak]

(SOLD)This fits the 70 Challenger only. This trim piece has a chip missing on it. I am have another trim piece that is broken on the opposite end that I will include for free if someone wants it. Between the two pieces a nice one can be built. I am asking $20 for both parts.

 

[challenger6pak]

Left Side Lower Dash Trim for 70-74 Cuda and 71-74 Challenger. This is a nice piece. It needs nothing. I amasking $25 for it.

 

[challenger6pak]

(SOLD)This is a left lower dash trim piece for 70 Challenger only. It needs cleaned up. It has something on it that is like glue residue. It has a crack that will need fixed and another mark that looks like something rubbed against it. It is an easy piece to restore. I have pics of the damaged areas I'll be glad to send out. I am asking $25 for it.

 

[challenger6pak]

This moulding to the best of my knowledge is no longer available. One like this one has to be sent out and redone. This moulding has a scuff on the front and a few small dents. It is a good one to restore. I am askng $20.

 

[Brads70]

View attachment 11063This moulding to the best of my knowledge is no longer available. One like this one has to be sent out and redone. This moulding has a scuff on the front and a few small dents. It is a good one to restore. I am askng $20.

Is this for the front valance on a 70 Challenger?

 

[challenger6pak]

Hi Brad. The 70 is a two piece part. Here is a pic.

 

[Brads70]

Hi Brad. The 70 is a two piece part. Here is a pic.

View attachment 11073

Ah Ok thanks! Are these available new? repoped?

 

[challenger6pak]

Yes. There are repops. They aren't as good as original. This pic is from PG classics. Go to Ebay and look up 1970 challenger molding and you will find it.

 

[Brads70]

Yes. There are repops. They aren't as good as original. This pic is from PG classics. Go to Ebay and look up 1970 challenger molding and you will find it.

Found them, thanks! Wow pricey rascals!:evil6:

 

[challenger6pak]

This is a 2 speed wiper switch that fits the 70 and may fit the 69 B body. It looks to be in VCG. The part number is 2947490. I am asking $20 for it.

 

[challenger6pak]

This is a good original washer bottle. It needs cleaned up. It has some black overspray on it.

 

[challenger6pak]

These are 1970 Challenger Tail Light Housings. They are in good condition. They are not dented. I am asking $15 ea.

 

[jeffro]

do you have lower controll arms