In the above picture I see where the luggage rack holes for the 4 mounting points are. Where are the two rear holes located? Are they two of the 3 holes labled labeled factory mounting holes?
I need to adjust the convertible top on my '71 Cuda so that the guide pins go into the proper position when the top is fully closed and latched. It is difficult to show in the pictures, but the guide pin on the passenger side is off by about 1/2" and ends up outside the hole pressing on the...
I would like to have the windshield replaced/repaired on my ’71 Cuda Convertible. It appears to be the original windshield, but it is very pitted and has some wiper scratches. My understanding is that when a windshield is pitted, polishing it is not a great idea due to distortion and the...
Ok.. so I found the problem. Pushrod slipped off the rocker. Can I just replace the push rod(s) or do I need to remove the head to inspect for any damage? Picture of damaged push rod attached.
Was crusing at normal speed etc. when this loud knocking noise coming from the engine started. I was able to limp home. Before I start tearing the engine apart, I thought someone might have an idea as to what this might be.
I made a short video so you can hear it. Thanks in advance for...
Thanks for your comments!!! Yes.. I was too good to be true! So now I think they car's price has returned to a more reasonable place. I have the car under agreement with an inspection and visit scheduled for next week. Here it is... if you see anything else.. or have any other...
Thanks for your comments!!! I have the car under agreement with an inspection and visit scheduled for next week. Here it is... if you see anything else.. or have any other suggestions... please let me know! This is a big deal for me...
Thanks! That is what I am thinking. I'm not buying the story.. I'm buying the car in it's present condition. I have the car under agreement with an inspection and visit scheduled for next week. Here it is... if you see anything else.. please let me know...