Recent content by brown_devil

For various reasons I have only recently been able to work on my car. Here's is what I found. The insulation on the black wire on the passenger side of the bulkhead connector had melted in one spot and had also melted thru the wire that supplies the passenger side marker light causing both of...

Thanks for all the responses. I had previously replaced the screw with bolts bolted thru the firewall. I cleaned the paint off the regulator and firewall and used the washers with little teeth on the external perimeter. Testing with a meter I have a good ground connection. I guess it is...

The voltage regulator I used was a mopar performance regulator from Mancini racing.

I have an issue with my car overcharging sometimes. Alternator was replaced about 5 years ago and has been working fine until now. A few weeks ago I was going to a cruise night and while driving on the highway for about 30 minutes the amp gauge pegged to the right and my fuel and temp gauges...

How much for the gauge cluster