You can convert your original alternator to a one wire alternator by adding a small external voltage regulator to your alternator. I have used this on my car when I rewired the car with the AAW kit. There are several videos on youtube that show you exactly how its done, very simple and cheap.
all the lights should work as before with your original you willneed to wiring harness, if i remember correctly use the speedometer adapter for the transmission. your lights should work as before but the indicator lights will need a separate wire from the turn signal wires and for the parking...
I have four 14 inch ralleye wheels, rims,trim rings and center caps. I will sell them for 100.00 for everything. I am also located in Florida. I believe the rims are 14x6 and 14x8.
The american wire harness is only set up for a single wire alternator which has an internal regulator. I mounted my sniper ecu under the dash. I mounted the ecu for the dakota digital in the passenger kick panel. All of the wire pertaining to the gauges are no longer needed. I just cut them out...
You do not need the voltage regulator because the american wiring harness is made for a one wire alternator with an internal regulator. I mounted the sniper ecu under the dash. I replaced the original electronic distributor with the Holley distributor. I mounted the computer for the dakota...
YEARSBEHIND, The air cleaner was mailed yesterday. After 73petty blue offered me 150.00 I had someone local offer me my original 200.00 price. H e changed his mind so I took your offer.
PETTYBLUE wanted the air cleaner with the trap door and that is what he said he wanted. I have made at least...