Recent content by douglas17

Should mention Transmission has a Locar kick down cable .Installed as there directions exactly. Could this be applying to much pressure on the kick down leaver tricking the valve body that its performing the wrong function .

engine is a 1969 340 with a 6 pack, has new carbs from Holley. Engine idles just fine cold or hot. you can apply brake peddle when in park or neutral has no effect on Engine. Put trans in R or 1 2 D Transmission works properly and shifts. Soon as you touch the brake peddle engine stumbles and...

not fixed yet. works ok when cold, but when engine warms up it will stall every time. forward and reverse

Think the problem may be solved. waiting on part and test drive. Fingers and toes crossed.

Engine stalls when in gear, with foot on the brake. Engine was running fine , transmission shifted smoothly drove about 20 miles. First stop light, foot on brake engine stalls. put it in park engine starts right up, put it in drive engine stalls. brought it home and with back wheels off the...

Update. The size of the threaded portion on the original clock reset stem. This is for the clock in a standard dash cluster only. The closest I can come is #1-72 UNF. Screws in and tightens with no play in any direction.

Does anyone know the size and tread count on the stem for the reset knob. This is for the reset knob on the clock in the standard dash cluster. I know parts are available from different suppliers. The problem is the final price. Cost of item + exchange rate + shipping and duties and broker fees...

I was just trying to narrow down the spline count with out tearing the old one apart first. The yoke is worn on the inside from the snap rings and the 1/2 round where the u joint cup sits is worn egg shaped. Found lots of yokes on the internet with the 072640, but then the two digits preceding...

Wondering what the 2 digit number preceding the 072640, in my case 49 means as i see different numbers before 072640 when searching for a new yoke. Is the 072640 always a 10 spline yoke?

In search info or photo. Was the rear window louver an available option on the 71 Gran coupe?

Info is very hard to come by. Just received and event list and finally a list of mid way vendors for this year, 1 week ahead of show. Very hard to order and pick up at show at this time. Found them to be very disorganized, most likely cant find workers just like everyone else. Be on our way to...

yes the only info to be found is on the track web site. Not sure why the Nationals web site is not updated yet .people from away would like to confirm dates and make reservations and arrange time off from work ect.

Outrageous brokerage fees being charged by UPS, on top of regular shipping rates. Canadians beware before purchasing from US based retailers. Brokerage fees have soared as of late. Do your home work before purchasing, Just some FYI.

Anyone in here from the Columbus area, or frequent attendee of the Mopar Nationals. Looking for recommendations on hotels/motels ect. in the area of National Trails Raceway. Something reasonable, and closer the better. Just the average joe checking things out, not looking to impress anyone. Tks...

Thank you pschosser. Ill check it out over on that site. May have to machine my own knob if I can find some dimensions.