• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

HPP's latest activity

  • H
    HPP replied to the thread Does motor sit level in engine bay?.
    Performance issues...typically no. Depending on how far its off, it could create extra wear on clutch linkage bushings, or possible...
  • H
    The SS springs will create more body rise than original, so you need shocks that are at least a couple inches longer than stock to avoid...
  • H
    HPP replied to the thread Front and rear valance.
    My '74 valances appear to be similar to that in the pictures above. Mine have original color overspray in many places, but it is not...
  • H
    HPP replied to the thread rear height.
    I suppose you could use a shorter shackle to get a slight amount of drop. Being at the rear of the spring, it isn't a 1:1 drop for the...
  • H
    HPP replied to the thread Does motor sit level in engine bay?.
    It's not uncommon for an engine to not sit level side to side after install or replacing motor mounts. There is just enough slop in each...
  • H
    HPP replied to the thread I still just don't get it!.
    Don't overlook the fact that the Bugatti can reach 200 with the a/c blowing cold in street legal configuration while being easy enough...
  • H
    HPP replied to the thread rear height.
    Yep, from the factory, with equal size tires all around, the only E bodies that sat taller in the back were the AAR/TA twins. Everything...
Back
Top