i_taz's latest activity
-
i_taz replied to the thread Molded heater hose.On the bright side I went to return them via ebay and they just refunded me so at least I got the 2 aluminum straps out of the deal... -
Those hose clamps are definitely leak free and factory engineered by Mooar! They go on and off best with pliers made for them! An...
-
i_taz replied to the thread Molded heater hose.I had to somewhat, you get extra. They seemed ok until I put them in the bracket. I even cut a little off the bottom of the nipple since...
-
I'm having issues replacing what appeared to be B body heater hoses on my 440 R/T but the Year Ones i got for A/E cars aren't molded...
-
-
i_taz replied to the thread 1970 Challenger 440 Heating Problems.My cars temp seems ok but can't help but wonder about the updated aftermarket head gaskets that replace the top holes with slits like...
-
-
440 bore is 4.32 , .04 is 40 thou over
-
i_taz replied to the thread Piston impressions.Sorry, it was a 440... Wonder if that's a good thing. Since there seems to be a problem sealing the valley pan my primary purpose was to...
-
I'm cleaning out my cylinders from a leaking valley pan and see .04 stamped on the pistons but measuring with one of those cheapo...
![20240414_122753[1].jpg](/forum/data/attachments/117/117978-754d7783235b5a7d035a5c4bfc8c441c.jpg)
![20240414_124010[1].jpg](/forum/data/attachments/117/117979-d86ca798090a25656247ae99b76fd5ba.jpg)
![IMG_20240109_170349556[1].jpg](/forum/data/attachments/115/115788-fa922e85edea46d87a64426a8695d2f6.jpg)
