Katfish's latest activity
-
Katfish replied to the thread RetroBelt 3 point Seatbelts.Interesting, they don't have an option for Dodge in the pull-down? -
My Thermo-Quad Guide does not make specific kit brand recommendations, as it is a reference guide. Some of the brands and kits listed...
-
I would use Ospho for that. A quart bottle is less than $20 at the local hardware store and should be more than enough for your floor...
-
Katfish replied to the thread Help! Trunk latch question.How about this? Pardon Our Interruption...
-
Katfish replied to the thread Help! Trunk latch question.The lock cylinder comes with the rods Pardon Our Interruption...
-
Katfish replied to the thread Mopar convert.Hard to beat a fastback Mustang, I'd trade mine for an Eleanor in a heartbeat.
-
Hi, Did you do the engine work or was it already done when you bought it ? If so has it ever run properly ? Or have you replaced...
-
Katfish replied to the thread Hellcat or a 6.4 hemi engine swap..Best mod you'll ever do, guarantee you'll wish you had done it sooner.
-
Katfish replied to the thread AC vents in Non AC dash.All of the metal frames for the dash pads have the cut outs in the metal for the AC vents. I'd think you could carefully cut away the...
-
Katfish replied to the thread Shifter lamp.That connector to body ground is marginal. I installed an LED Bulb and it wouldn't work. I ended up soldering a wire to the socket...
-
Katfish replied to the thread rear height.New tires >$600 or more, just for back Lowering blocks $60 Front hangers with additional hole for height adjustment, $200?
-
Katfish replied to the thread rear height.Might be easier to just add lowering blocks? Mine is around 26.5, don't like to see top of tire. https://postimages.org/][/url]
-
Katfish replied to the thread Restoration begins on a '71 Barracuda.Nice!
-
Katfish replied to the thread Blown rear end?.That doesn't sound good, I'd take the wheel and drum off and see how the axle looks/feels.
-
Katfish replied to the thread Blown rear end?.Link no worky