Recent content by Monty's 340

I was really hoping that replacements might be readily available at a decent price, they're not!! I had a new set on the car when I took it off the road in 1976. Unfortunately here in Canada with the salt and sand on the roads and then being in various states of storage the balance weights...

Update On Rotors, located a potential source sold by Jegs and Amazon, need to verify fitment. Company call R1 Concepts show a selection or rotor only from OE type to drilled and slotted performance type. Shout out if anyone has used them and found them to be a fit. Thanks all...

Yes, that is exactly what I'm searching for. If any one has a source please post!!! The studs protrude through the brake rotor from the hub and the brake rotor is press fitted onto the center flange of the hub so it becomes a fixed unit.

Yes, that is exactly what I'm searching for. If any one has a source please post!!!

Hey all, working on a 72 Challenger and would like to keep the original hubs and just replace the press on rotors, anyone been there/done that? Looking for a supplier. If no will have to use aftermarket rotors and hubs. Thanks in advance. Cheers

Classic Industries offer the hinge supports https://www.classicindustries.com/product/me861036.html

The Timken part #'s are LM11910 cup and LM11949 for the Race any good bearing supply house like Motion or BDI will have them cheaper than most auto parts stores. Those are for 11 inch Disc's off of my 72 Challenger built in Sept. of 71.

Good stuff, I'm sure there are good used units out there I did see a couple on EBay and also Herb"s and year one. Happy hunting!! Cheers

Wow I have had mine (1972) for 49 years and only have 28,000 on it. Hasn't seen the road since 1976. But harsh winters and lots of road salt started the cancer and it did some damage as well as tubbing, roll cage and frame connectors. So I have it on the rotisserie going over it inch by inch and...

Good luck with that Gary, hope it works out. You said it was for a client, are you or did you do the restoration?? All the best Cheers

Yes there are short solid tabs on the short sides of the insert, the upper right one you circled . they are bent in under the recess to hold the astray surround/ receptacle in place in the console. The ones on the left center I believe are at the back of the console. Yeah well then there is no...

Well you are a ways off from me, I'm in Mount Albert Ontario, Canada. So bunch of pics coming. Bezel is fastened in the console with two tans inside on left and right sides. Hope these came through ok, let me know if you need anything additional. There seems to be quite a bit more of a...

Well you are a ways off from me, I'm in Mount Albert Ontario, Canada. So bunch of pics coming. Bezel is fastened in the console with two tans inside on left and right sides.

Hi Gary where are you located? I'm just back from visiting friends but I will take some pictures and post them within the hour.

Just checked my ashtray and lighter in the console on my 72 Challenger, original and the console doesn't appear to have quite as much curve as you are showing, the ashtray bezel is mounted in the console and conforms to the very slight curve in the center section of the console but the ashtray...