• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Recent content by mopar jack

  1. mopar jack

    A/C solenoid

    If your car came with an anti run on/diesel solenoid I would tap into that source. I recently installed a Vintage air system and with a 440 set to idle at 900 rpm haven't needed a solenoid.
  2. mopar jack

    THE TERMINATOR

    Just sitting there and the floor is cracking!!
  3. mopar jack

    Vintage Air and 440 6 pak

    I used the BPE 4710 bracket that works with the 440 source water pump housing. The compressor cannot sit any lower on my application. I was looking at the shorty compressor and heard it doesn't perform as well as the standard one. The 2 belt alternator works well but I had a serious problem with...
  4. mopar jack

    Vintage Air and 440 6 pak

    its a sandon 508, not a shorty
  5. mopar jack

    Vintage Air and 440 6 pak

    This is my 71 road runner with a 440 4bbl not a sixpack but same style base plate and it clears the compressor. All brackets were sourced through Bouchillon
  6. mopar jack

    WTB 2 groove big block (440) water pump pulley

    The Vintage air does not use an idler pulley.
  7. mopar jack

    Need information on brown interior color pp664, or pp656?

    I used paint from Herbs parts on my 71 road runner with brown interior and the match was dead on. Herbs part #1188 and listed as #664 brown 1971
  8. mopar jack

    Hi there from SF Bay Area - another owner / builder

    welcome from the SF east bay area. Love the color, just painted my B body Vitamin C.
  9. mopar jack

    Source for vapor barrier adhesive

    I tried the rope caulk from home depot and it wouldn't hold the barrier. It's not very sticky and is similar to plumbers putty.
  10. mopar jack

    Source for vapor barrier adhesive

    performance graphics sells the barrier and ribbon tape. www.performancecargraphics.com/Door_Stuff/Moisture_Barrier.htm
  11. mopar jack

    Windshield Replacement

    check out Chrysler test from the 70s www.motorious.com/articles/news/vintage-chrysler-crash-tests/
  12. mopar jack

    Broken water pump pulley

    pschlosser, there is a mopar car show October 7th at Hagan park put on by Capital City Mopars.
  13. mopar jack

    Broken water pump pulley

    Here is a pic of the pulley off the car. The break is at a point of the sharpest bend. The break looks like the edge of a small saw blade.
  14. mopar jack

    Broken water pump pulley

    The pitman arm comment was related to how hard the steering was and at my age with arthritis and various muscle issues I was lucky enough to steer the car with no power. I have to believe the factory built these cars engineered with some safety features such as a steering belt failure. Theses...
  15. mopar jack

    Broken water pump pulley

    Not an E body but same parts. I took my road runner to the Goodguys car show at Pleasanton yesterday and won the Mopar muscle award. Had a great time but on the ride home cruising at 70 heading into a hard right turn on I 680 the steerining went dead and I'm heading for the divider, fortunately...
Back
Top