Recent content by racer939393

did you have` a problem with the linkage binding and not able to turn steering wheel on mine where the steering column u joint goes on the rack and pinion. my is at such a angle can not turn wheel

I have aftermarket strut rods from QA1, new spindles for disc brakes, new ball joints upper and lower, everything else is stock. I'll try to get a picture. thanks for helping me.

sorry new Mopar man, tie rod is hitting the torsion bar. tried putting on the center link the other way and it hits my oil pan, it is a aftermarket oil pan.

no I do not have the old parts. I do have a manual.

I am rebuilding a 1974 dodge challenger 360 with power steering. My problem is on the driver side the inner tie rod hits the torque rod. I have no problem on the rightside. It is not possible to turn the wheels to the left. I have all new pitman arm, tie rod ends, idler arm and spindles. Any...