Recent content by RANDY LOBERGER

Body work was completed before I purchased the car.

Posted under other request, not familiar with listing here but think you can view them?

I numerous pictures in some of the other replies.

Very nicely restored.

Included some of these in previous responses.

I have all those pictures but site would only allow me to post 10, will try to load some more in this response.

Looking to sell my 1970 Challenger T/A. Recently posted it on T/A AAR forum and will list here but don't want to deal with Market Place. Car is recent full restoration with about 800 miles put on by myself over the past 5 years or so. Just don't drive it enough. Numbers matching. Looking for 85K...

My Challenger T/A has this valve, production schedule date of 4/01/70. Not sure if they were different due to the front disc brakes.

Does anyone know of a source for the mounting clips for the hood lip molding for a Challenger T/A? They need to be slightly longer than the standard clips due to the thickness of the fiberglass hood. 3/4" would probably work. Thx.

I believe you all are correct, attached a picture of the pad, appears they stamped a W over the date, likely stands for warranty. Thinking this block was sold 5/11/72 as replacement block. Thx.

I have a 440 block that supposedly came out of a 1970 6 pack cuda. Casting 2536430. production date 11/10/69. I can find no serial number, possibly warrant replacement? Plate by distributor has stamping S 440 and 5 11 2, not familiar with these numbers. Any ideas? Is there a difference between a...

Just got my T/A back from mechanic who adjusted my 6 pack and tuned the engine. He is a retired mopar mechanic who spent much of his life working on these cars. He says however that he is not a transmission mechanic and my car has an issre with the auto trans. He says the car moves about 10 feet...

Linkage in place, the master cylinder spring seems to be working fine, it returns the pedal to normal position when the car is not running. It does seem to be stuck when I remove the unit after depressing the pedal with the car running and booster operating. Front calipers are on correctly, have...

Finished my T/A a couple of years ago but have been struggling with brake issues and am at my wits end. Problem was soft pedal and brake light coming on when applying brakes. All new brake system components and rebuilt original power booster. In trying to resolve the problem I replaced master...