Ronbo73's latest activity
-
Ronbo73 replied to the thread Cruise Control Problems.I did and it didn't seem to hold the speed. I found that the vacuum line feeding the cruise unit from the brake booster was squished... -
Ronbo73 replied to the thread Cruise Control Problems.Cruise unit with lost motion link on attached to the center carburetor.
-
-
Ronbo73 replied to the thread Cruise Control Problems.Hello Old Mopar. My car was originally a 318 2 barrel w/cruise. I saved the carburetor with all linkage from the manifold and I do have...
-
Ronbo73 replied to the thread Cruise Control Problems.I am in the process of troubleshooting my cruise unit also. I am retrofitting mine onto my 6 barrel setup. Where did you get a new...
-
Ronbo73 replied to the thread Hand cranking the engine.If you want to prime the engine to make sure oil has traveled through engine I would just pull the coil plug wire off the coil or...
-
Ronbo73 replied to the thread HB1 Barracuda build.I did not Dyno the engine. I would have liked to but there is no dyno's close enough. My guess is in the low to mid 400hp range. Yes...
-
Ronbo73 replied to the thread HB1 Barracuda build.I'm about 360 miles away from Carlisle. I need to get some miles under my belt before I trust that she'll go that far without issues...
-
Ronbo73 replied to the thread Thread locker on transmission bolts.If the vehicle is not running just put in as much as shows full on the dipstick. Once its running, put the transmission in Neutral and...
-
Ronbo73 replied to the thread Thread locker on transmission bolts.I believe it is 10-12 quarts. I just checked it last week and I had to add 2 quarts so I think its more on the 12 quarts side.
-
Ronbo73 replied to the thread HB1 Barracuda build.Some day I would love to go to Carlisle. I'm not sure if I could afford the gas to drive the Barracuda there.....
-
Ronbo73 replied to the thread HB1 Barracuda build.Hello 1973, I did not do the body work but with a help of a couple friends, when needed, I did the rest of the work myself. Without...
-
Ronbo73 replied to the thread HB1 Barracuda build.Thank you Challenger RTA. As you know, they are never truly complete...
-
Ronbo73 replied to the thread Thread locker on transmission bolts.I am using the same pan gasket and also have a deep aluminum pan (trans came from a motorhome). Just as Challenger RTA and...
-
Ronbo73 replied to the thread HB1 Barracuda build.I'm hoping to go to a bunch of car shows this year. The first one that I am planning on going to is in Pomfret CT on April 26th, weather...
-
Looks great. I'm right around the corner from you (Tolland, CT)
