Recent content by sheetmetaldan

Well new problem now. I just spent the day putting everything back together and of course the car won’t start! It tries to turn over cranking for a split second then just the clicking sound from the solenoid. Even with a 200/A battery starter on it I can’t get it to turn over. Just to recap...

Yeah it’s kind of a mess! Thank you everyone for the help! I’d still be 1/2 stuffed under my dash swearing like a madman if it wasn’t for everyone’s help! As of now I have 12v to the gauge cluster (used the large blue Acc wire at the base of the column) and have power to the instrument...

I checked mine its dead. My problem is the guy who put in the painless fuse block butchered my wiring. So that’s why I’m now just trying to find power where I can to get things working again. I have my instrument lights back. It’s not factory correct but they work so I’ll take it! The dimmer I...

Well connecting to the headlight switch was a bad idea the fuel gauge now works when I turn on the headlights 🤣! I’m gettin tired & making poor choices! Lol

Wipers do work but do not park themselves when I shut them off. I gave up on the dimmer for now, I think I’m closer to getting the gauges and instrument lights working so I’m focusing on those first. Quick question. I’m trying to run a new 12V wire to the voltage limiter im just not sure which...

I did check all the fuses look good

Just checked I have power from the headlight switch into the Dimmer SW. but no power when I check the other two terminals on the dimmer switch connection? I even removed the dimmer & used jumpers to bypass it in case the switch is bad. On a positive note I did run a 12V jumper to the RTE...

So I need to find 12V and bring it to the RTE regulator, does that give power to the entire gauge cluster?

Thank you I think I have the gauge lights figured out. I started to look at my gauge cluster I have power to the Alt gauge (all I have at the moment is a simple test light) the needle on the alt gauge doesn’t move at all. If I turn on the directional shouldn’t the needle twitch a little with a...

Yes I’ve checked grounds aren’t the issue thanks

I posted recently about my wiring issues. Im posting again if anyone can help me out. Here is my dilemma I had someone install a painless (PAINFULL) wiring harness.( THe original fuseblock terminals were badly corroded and giving me problems so I went for modern fuses.) When I Got my car back my...

Much appreciated! Thank you