tonysrt's latest activity
-
Ttonysrt replied to the thread Installing a trans in the old days by yourself; the way we old timers had to do it!.I use B head bolts with the head cut off to align tranny. When I tried getting that 4 speed in, I could only lift the front on to the...
-
Ttonysrt replied to the thread Installing a trans in the old days by yourself; the way we old timers had to do it!.I had times when I had to replace a 3 speed tranny. So when my 68 Road Runner 4 speed blew the clutch, out of warranty of course, I knew...
-
Ttonysrt replied to the thread Nag1 Starter.On my 74 318 Duster and 71 Hemi Cuda, starter is far enough away from steering box. Although both cars have the Borgeson box, I don't...
-
TI have a 1973 Cuda 340 4 speed, Yes the engine did over heat into the red line 2 times ( First time I thought it was just low on...
-
Ttonysrt replied to the thread Head Gasket leak.What engine, and do you know why gasket is leaking? Usually an overheat, or maybe cheap gasket. If you tell us, may help someone else...
-
Ttonysrt replied to the thread 74 cuda new hood.The other thing to watch is they only had the shaker with cut out for hood pins. Fortunately my car was original to hood pins so not a...
-
Ttonysrt replied to the thread 74 cuda new hood.On a 71 Cuda I used a shaker hood from AMD and bought it from Stephens at Carlisle. It fit really nice, but not sure if the weight is...
-
Ttonysrt replied to the thread Nag1 Starter.I guess original starter cable gets deep sixed. After having it on drivers side for a 100 years, lets put it on passenger side for a...
-
Ttonysrt replied to the thread Anyone ever see this before.Did he think it was a 71 thing only? I have my 71 build sheet and no I or O's on it.
-
Ttonysrt replied to the thread Anyone ever see this before.I would think the workers wouldn't have access to the O's and I's because they know somebody would incorrectly use them. Could it be...
-
Ttonysrt replied to the thread Anyone ever see this before.They don't use O's and I's in Vin's because of the confusion it may cause. They only use 1's and zero's in the vin.
-
Ttonysrt replied to the thread FOR SALE 318 340 Deep oil pan.318 & 340 pan doesn't fit a 360.
-
Ttonysrt replied to the thread Hood won’t latch..Get some clay or silly putty and put on the bracket and close hood you'll be able to see where you're coming down on.
-
Ttonysrt replied to the thread Hood won’t latch..I don't know what car were talking about beside an E body, maybe you have the wrong receiver that accepts the latch. The other basic...
-
Ttonysrt replied to the thread cuda bumpers.I believe 70-72 bumper brackets are the same, 73 & 74 are different.
