• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Xcudame's latest activity

  • Xcudame
    Xcudame replied to the thread Hello from New York.
    Welcome to FEBO from the desert! Nice to have you! Pictures are always welcomed here!
  • Xcudame
    Xcudame reacted to moparleo's post in the thread Hello from New York with
    Like
    Like
    .
    :welcome: Aboard.
  • Xcudame
    Xcudame replied to the thread Long Time Member of Other Mopar Forums Just Joined the Gang Today.
    Welcome to FEBO from the desert! Baja California is beautiful! All the Cudas and Challengers running in the Trans Am circuit were 5...
  • Xcudame
    Xcudame replied to the thread Preload the carb.
    Yes, put about 25 to 30 cc (ml) in each side. Don't need to completely fill the bowls as the fuel pump will quickly do that when turning...
  • Xcudame
    Xcudame reacted to gzig5's post in the thread Value cover studs with
    Like
    Like
    .
    Rule of thumb is that the length of a threaded fastener going into the hole should be at least the diameter or the thread. Going longer...
  • Xcudame
    Xcudame reacted to Challenger RTA's post in the thread Lost Shadows with
    Haha
    Haha
    .
  • Xcudame
    Xcudame replied to the thread Critters in radiator.
    Somewhere there is a chipmunk running around frantically looking for his nuts! 😂
  • Xcudame
    Xcudame reacted to Challenger RTA's post in the thread Critters in radiator with
    Haha
    Haha
    .
    Don't those kind of things just drive you nuts!
  • Xcudame
    Xcudame replied to the thread Good to be Here!.
    Welcome to FEBO from the desert! Most 2.76 gears were open, so you may have to have one built. I attached a link to a 3.55 sure grip on...
  • Xcudame
    Xcudame reacted to Mascottrepair's post in the thread Harness Wrapping with
    Like
    Like
    .
    Nice work on that harness, sounds like you’re doing it right! That translucent wrap you're seeing is likely fiber-reinforced PVC tape or...
  • Xcudame
    Xcudame replied to the thread fuel adapter.
    As long as it runs and you can enjoy it is the main thing at this point. E-Bodies are definitely an "E" ticket ride. I can't wait until...
  • Xcudame
    Xcudame reacted to 7DCUDA383A's post in the thread fuel adapter with
    Like
    Like
    .
    I was looking for a rubber 90 degree or something like that , I'm just gonna run it up to a filter and go , it isn't that bad of a bend...
  • Xcudame
    Xcudame replied to the thread Harness Wrapping.
    What you want to make sure is whatever you use, make sure it's not the soy based crap on all the new cars! That's what rodents love to...
  • Xcudame
    Xcudame reacted to Daves69's post in the thread Rocker wiggle with
    Like
    Like
    .
    If you rotate the crank, you'll likely find others that are similar. Try it and let us know.
  • Xcudame
    Xcudame replied to the thread Rear acle help please.
    I've seen a lot of Mopars that are in the 1/2" range of offset from side to side and I've heard of some being off as much as an inch...
Show older items
Back
Top