Xcudame's latest activity
-
Xcudame replied to the thread Oil Pressure Low.Also, bypassing the oil cooler would be a quick check to eliminate or confirm it as the problem. -
I would do #2 first, I think it’s the most likely problem and may save you some work. I believe the pick up threads into the block, no...
-
ready for seam sealer tomorrow have is all red scotchbrighted and wax and greese remover cleaned, going to seam seal tomorrow hopefully...
-
Xcudame - I will take that compliment my Ebody friend! Brothers from a different mother perhaps 😀 well - in thinking about that - my...
-
Xcudame replied to the thread 1971 cuda wheels and tires help.Yes, with stock 15x7 rims, 275 will fit in the rear.
-
I would agree 15x7" rims with 275 tires will fit , I prefer the 275/50 over the 275/60
-
-
Thanks, I thought about it, but I do have a sonic cleaner and was going to gold chromate the carbs with the caswell plating kit. which...
-
Xcudame replied to the thread Power Brake Booster.I'll send you the part numbers tomorrow unless someone beats me to it!
-
Xcudame replied to the thread Camber Adjustment Question.I won't build an E-Body without Moog offset upper control arm bushings or aftermarket upper controls arm! Gotsa have more caster and...
-
I got adjustable upper arms from BAC. My alignment tech thanked me because it was so simple to adjust. Can also get much more caster...
-
I used to do alignments too, and this advice is spot on! If you start messing with the cam bolts to try and correct your camber you're...
-
This is my 71, I'm going to do a you tube video on this one, long story but this isn't how the car was presented, but it is what it is...
-
There is no difference between the Cuda and Barracuda lock cylinders, either one should work fine for what you want.
