• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Xcudame's latest activity

  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread Battery: What are you using and why. with
    Like
    Like
    .
    I had an Optima red last 13 years in a daily driver but they do not like to sit .
  • Xcudame
    Xcudame replied to the thread Rocker arm kits.
    Agreed, needle bearing rockers are the most likely to fail. And aluminum rockers are great for a high revving race engine that will be...
  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread Rocker arm kits with
    Like
    Like
    .
    THIS is exactly why I never use needle bag rockers , only 3-4 carry all the load & don't move very far grooving the shaft & wearing the...
  • Xcudame
    Xcudame reacted to MoparCarGuy's post in the thread reproduction fender tags with
    Like
    Like
    .
    The repro dash VIN plates from the Netherlands are a good try but are easily distinguishable from a real dash VIN plate. That is a...
  • Xcudame
    Xcudame reacted to MoparCarGuy's post in the thread Console Fit Problem with
    Like
    Like
    .
    Most consoles have the bulge problem and often crack in this weak area. I converted my auto console to a manual console and, at the same...
  • Xcudame
    Xcudame replied to the thread rear height.
    The most important thing regarding ride height is that at rest on level ground, the leaf springs are just about perfectly flat on top...
  • Xcudame
    Xcudame reacted to 6PKRTSE's post in the thread rear height with
    Like
    Like
    .
    My blue car is 25" and my red car is 27-1/2" at the top of the rear wheel well lip opening.
  • Xcudame
    Xcudame replied to the thread reproduction fender tags.
    I fortunately have both fender tags for my 70 Challenger and 71 Barracuda. If I lost one, I would feel most comfortable paying the money...
  • Xcudame
    Xcudame reacted to rallye340's post in the thread Blown rear end? with
    Like
    Like
    .
    A gear oil change certainly wouldn't hurt plus you'll get a better look to see if any metal particles are suspended in it. The friction...
  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread Blown rear end? with
    Like
    Like
    .
    I used to blow up an 8 3/4 every year the spider gears would fail . I hope it is something else ! New fluid will not harm anything but...
  • Xcudame
    Xcudame replied to the thread Console Fit Problem.
    We forget these cars were designed to last like 7 to 10 years maximum! After 50+ years, the plastic interior parts expand and contract...
  • Xcudame
    Xcudame reacted to Ronbo73's post in the thread Console Fit Problem with
    Like
    Like
    .
    My center console had a slight bow there also. I removed the console and then used a heat gun to make the plastic pliable and pushed...
  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread Console Fit Problem with
    Like
    Like
    .
    You could epoxy a small diameter steel rod under it to support it & epoxy it from below
  • Xcudame
    Xcudame replied to the thread Rocker arm kits.
    Which 440 Source Rockers did you use? Hopefully not aluminum!! I ask because 440 Source actually listens to us consumers and try to make...
  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread Rocker arm kits with
    Like
    Like
    .
    Great rockers , i have used them on many engines! You should be able to get them for $700 US or less tho , try Ebay .
Show older items
Back
Top