Xcudame's latest activity
-
get warmer? does your car get warmer when running, even though the heat is off? the heater flow valve control to the left of the... -
Xcudame replied to the thread What Upper & Lower Hoses?.Just throwing this out there, if it's a down flow radiator (as opposed to a cross flow), I prefer the inlet and outlet to be on opposite...
-
I was an Auto Parts Store owner for many years. I can tell you that your best option would be to know what you need and go into a full...
-
Xcudame replied to the thread 70 barracuda vin question.I can see 425492 in the above body stamp. Heck, no engine and transmission, you can put whatever you want in there! I'm partial to big...
-
Xcudame replied to the thread Did they make any 70 Challengers with a 383 HP non R/T car.My understanding is that for the B and E-Bodies they only built the E63 383 HP four barrel 383. @Vaanth 's documentation points to this...
-
Sorry I'm not able to help, I used a factory 2016 radiator with a Dakota filler, it has top hose on passenger side and bottom hose on...
-
Xcudame replied to the thread 70 barracuda vin question.I think you're OK. Post a picture of the VIN, door sticker or Fender Tag! The numbers on the body are stamped pretty deep on your car...
-
Xcudame replied to the thread I can see clearly now..😂 (I really miss that button!)
-
Xcudame replied to the thread 70 barracuda vin question.Pictures will help a lot.
-
Reads like it is an assembly plant mistake. I'm curious to see the pics. BH23G0 B or E ?
-
Thanks for that pic! Yep, that looks just like what I saw when I worked at Dodge Main, the only difference is the Volare & Aspens had...
-
Xcudame replied to the thread Lug Stud Recommendation.The knurled section is smaller (.665" vs . 675" for the Dorman), so should work!
-
https://www.amazon.com/dp/B00TO6109Q?ref=ppx_yo2ov_dt_b_fed_asin_title https://www.summitracing.com/parts/msr-8040#overview This is...
-
maybe 100-110 PSI is on the low side, but several different things can affect your readings, such as valve and ring wear, cold vs warm...
-
ya it is, but that's today's world, but I know one thing I will be checking it all, every time.