Xcudame's latest activity
-
The parts you describe are the positioners, not the anti-rattle springs (clips). The positioners retain the caliper guide pin, or... -
The closest thing to the radiator will be the water pump snout if you don't install a belt driven fan. Accessories don't matter unless...
-
Xcudame replied to the thread Hello from Montana.That makes it much simpler! Stock 383s sure rev up fast! But if the internals need a lot of work, the 431 stroker (440 crankshaft and...
-
A 383 came with the car and it has a 8 3/4 rear.
-
Don't overlook the chassis and safety requirements for running 10s. Per NHRA 10.99 seconds (6.99 1/8th) or Super Street SFI 4.1...
-
Xcudame replied to the thread 1973 Challenger Rallye from Lakeport, CA.Thanks for sharing your story. Sad there are so many dishonest people out there. I'm sure they all will be extra warm in the after life...
-
Xcudame replied to the thread Hello from Montana.Welcome to FEBO from the desert! Nice looking Challenger! Curious as to why a 383? Do you already have a 383 to drop in it? Does the...
-
Just joined the forum. Thanks for letting me join. Working on a 1973 Challenger. B5 blue, 318 auto. Needs a fair amount of work...
-
Xcudame replied to the thread Vacuum advance.Assuming by Stock 383 you also mean a stock points type distributor, than yes, the ported vacuum port that opens up just after the...
-
I would use ported and at least 6-10 initial. I had interesting problem when I installed Fitech on my 340. The gas mileage actually...
-
Xcudame replied to the thread 1973 cuda measurements needed.That's kind of an awkward question. It varies to some degree depending on accessories especially air conditioning. The main thing is to...
-
Post a picture of your issue. Others may have encountered it. Is it part of the dutchman panel or roof or both? You just might have to...
-
Kinda sad actually . it was a farm homestead , 3 acres beside a creek with 3 rows of mature pine trees on 3 sides , nearest neighbor was...
-
Your looking for something and you know you have a few of them. Then you try to clean up.
-
Xcudame replied to the thread Pinion Snubber?.Years ago a friend of mine was following me in my 70 Challenger as we were getting on the freeway. Basically stock with factory sway...