• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Xcudame's latest activity

  • Xcudame
    Xcudame reacted to heminut's post in the thread Original vs Reproduction Dash Pad with
    Like
    Like
    .
    I would stay away from the plastic core dash pads if you can, they have been known to warp over time. Also, I would go with these guys...
  • Xcudame
    Xcudame reacted to NixDad's post in the thread Original vs Reproduction Dash Pad with
    Like
    Like
    .
    the grain/texture of the repros is different, so an original is noticeable but are very hard to find in good shape...plus 55 year old...
  • Xcudame
    Xcudame replied to the thread Original vs Reproduction Dash Pad.
    I believe Year One sales both plastic and steel core dash pads. In the original is in really mint condition, I'd go that route if it was...
  • Xcudame
    Xcudame replied to the thread Core support.
    And be sure to run a fan shroud like @Katfish has!
  • Xcudame
    Xcudame reacted to Ricks72Chlgr440's post in the thread Core support with
    Like
    Like
    .
    The only issue you may have is if you currently have an original radiator and then go to aftermarket. The aftermarket radiators do not...
  • Xcudame
    Xcudame reacted to Katfish's post in the thread Core support with
    Like
    Like
    .
    Absolutely, that’s exactly what I did to mine. Just drill a couple new holes on passenger side and add some rubber bushings to take up...
  • Xcudame
    Xcudame replied to the thread NEED FILLER NECK TUBE MOUNTING BOLT SIZES.
    For those with a 70-72 Barracuda/Cuda a little shorter screw with captive washer. 73-74 are shorter yet with no captive washer.
    • IMG_20260505_092754480 (1).jpg
  • Xcudame
    Xcudame replied to the thread NEED FILLER NECK TUBE MOUNTING BOLT SIZES.
    #10-14x.65" long Pan head Phillips.
    • IMG_20260505_092538430.jpg
  • Xcudame
    Xcudame replied to the thread brake clips.
    None of us is perfect, but as a group, we're pretty dang close. As a side note, I've not run the positioners or anti-rattle clips on...
  • Xcudame
    Xcudame reacted to Vaanth's post in the thread brake clips with
    Like
    Like
    .
    The following is a correction and adjustment of post #3. The Kelsey Hayes floating caliper positioners retain the caliper guide pin...
  • Xcudame
    Xcudame reacted to Vaanth's post in the thread brake clips with
    Like
    Like
    .
    @floyd is correct. I have the pictures and description notes backwards for the two sets of part numbers. Everything else in my post...
  • Xcudame
    Xcudame reacted to floyd's post in the thread brake clips with
    Like
    Like
    .
    @strycker @Vaanth I always appreciate Vaanth’s detailed and informative responses. In this case, I disagree on the 70 vs 71-72...
  • Xcudame
    Xcudame reacted to MOPARMITCH's post in the thread Bluecifer 1970 Cuda B7 Blue Restoration with
    Like
    Like
    .
    Time for an update. I've been back from Vietnam for 2 weeks. Collecting body supplies and having the trunk lid stripped. Last spring and...
  • Xcudame
    Xcudame reacted to wiging19's post in the thread Bellcrack mounting bracket Auto with
    Agree
    Agree
    .
    Chryco thank you for your input. Over the decades you've been quite a resource to draw on. I appreciate your knowledge and expertise.
  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread Bellcrack mounting bracket Auto with
    Agree
    Agree
    .
    That should work , it will tip the vertical shaft slightly but not affect the ratio , you may have to tweak the angle of the levers on...
Show older items
Back
Top