Xcudame's latest activity
-
looking at .235 intake and .281 exhaust -
The only time I have a tear in my beer if when I try to work on anything after 2 of them, my rule of thumb for that is stay back 1 foot...
-
thanks, cool story also. never did a whole lot with my dad when i was young, but later on in his life after he retired got to enjoy more...
-
Xcudame replied to the thread correct valve cover bolts 383 cuda.383/400/413/426w/440 from 64 to 78. 59-63 the big block heads had only 4 bolts and no studs. @DetMatt1 you are technically correct...
-
Xcudame replied to the thread 73 Soft Pedal Learning Process.Every old Mopar I've driven with power brakes seem to have low brake pedals. So you're probably OK with everything now. When the self...
-
Recheck that Green spring on bottom. Looks to be in wrong spot on 1 side. It shouldn't be dragging on the adjuster.
-
I moved the rod to the other hole. It sticks a little. I'm going to remove the lock mechanism, clean and lube it. I'm also going to take...
-
getting drunk with my car tonight
-
Xcudame replied to the thread Door Lock Lubrication.White lithium grease is pretty dang good for the price. You really want something better and not concerned about cost? Try Krytox 240AC...
-
I'm thinking around .30, I still have them I'll check when I get back out there, been quite a learning process for me, thank goodness...
-
Xcudame replied to the thread LCA compatibility.@Brads70 nice job! 👍
-
You can make your own easy enough....
-
Xcudame replied to the thread Door Lock Linkage Falls Off.So just pop the rod out, move the clip to the outer hole and pop the rod back in and you should be good to go! 🙂
-
Xcudame replied to the thread Door Lock Linkage Falls Off.OK. I took a picture of my 71 Barracuda and also a picture of a similar type clip.
-
