I want to replace the seat foam (bottom) on the driver’s side bucket seat in my 71 Challenger. Legendary will not sell individual seat foam components. Looking for someone to split an order or for someone who has a leftover new seat bottom foam piece. See second pic below for a list of...
I bought the wrong kit for my 70 E-Body and could only use the outer bearings. I have a new/unused set of Timken USA inner bearings/races plus seals for the later large-style spindles purchased from eBay seller "ricks-mopars" (Rick Ehrenberg).
Correct for 1973-89 A/B/C/E/F/R/J/M-bodies...
Original steel small block 10.5" bell housing inspection/dust cover. Fits bell housings with casting numbers 2843887, 2892482, 3515734, 3743859, and 4202507. Blasted and primed with some pitting. $50 plus shipping from MD.
Thanks for the ad!
Nice original set of 1970-only Cuda/Challenger cowl vent screens, part number 2895787-LH and 2895786-RH. Cleaned and ready to install. $60 plus shipping from MD. Thanks for the ad!
I bought this a few years back and ended up not using it. Current retail price is 59.95. Asking $40 plus shipping from MD. Thanks for the ad!
Link to website description: 5061001A DASH SCREW SET E-BODY NON A/C, INTERIOR, 5061001A :Mopar Fasteners, Clips & Hardware
This is an original late 1970 through 1971 E-body washer bottle with manual/foot pump. Also correct for 1971 B-bodies. Can be converted to accept an electric pump. Discolored only, no cracks or other damage. Perfect for a survivor car. $100 plus shipping from Maryland.
Thanks for the ad!
Getting things put aside for Carlisle and thought I'd pre-list some stuff here. Vendor space G-123/4/5 (right outside Bldg T). Pics on request. In-person deals preferred. Nats pick-up is also a possibility.
Original 2944450 Steel Wheel – Original paint and primer, dated 12/11/69. $550. SALE...
I have a very limited supply of NOS OE correct and OE appearing windshield washer pumps. These pumps are correct for variety of applications, including 67-71 B-body and 70-71 E-body. I have several options available with regard to the angle of pump discharge and ground wire configuration. Some...
I have a very limited supply of NOS OE correct and OE appearing windshield washer pumps. These pumps are correct for variety of applications, including 67-71 B-body and 70-71 E-body. I have several options available with regard to the angle of pump discharge and ground wire configuration. Some...
Complete electric washer fluid bottle and electric pump correct for late 1970 E-body and 1971 E/B-body. This is a new licensed reproduction bottle (purchased from Megaparts) with a NORS electric pump with the rare side discharge outlet. There are no part numbers or date codes on the washer pump...
Looking for 1-2 of these original style fuel line inlet fittings for a sixpack setup. Note the rounded shoulder where it meets the bowl. The hex head is 11/16. Looking for un-boogered ones.
Thanks for the ad!
Part of an auto store clean out. I have four of these electronic choke assemblies. All are unused with no box. I believe these correlate to Mopar part numbers 3698355 and 3751484 and will work on most 1973-82 V-8 applications. Brand unknown. Asking $15 each plus shipping from MD. Additional pics...
Complete electric washer fluid bottle and electric pump correct for late 1970 E-body and 1971 E/B-body. This is a new licensed reproduction bottle (purchased from Megaparts) with a NORS electric pump with the rare side discharge outlet. There are no part numbers or date codes on the washer...
Nice original LBP 14X5.5 Rallye dated 8/26/69. Original paint, straight, good lugs. $50 plus shipping or free delivery to Carlisle spots G-123/4/5 (outside corner of Bldg T).
Thanks for the ad!
Original 2944450 Steel Wheels – Gathered painstakingly over the past 20 years. $600 each. Carlisle vendor space G-123/4/5 (right outside Bldg T). Additional pics on request. In-person deals preferred. Nats pick-up is also a possibility.
1/16/70 – original paint
1/15/70 – powder coated...
Original dual groove crank pulley, part number 2946789 with asymmetric bolt holes. Correct for 1970-71 340/383/440 engines with power steering. Pulley has been stripped and painted. The interior portion has some pitting and was painted a flat black, the back side is excellent and was finished in...
Original harmonic balancer from a 1972 340 w/forged crankshaft, casting number 3614369 and matching dual groove crank pulley, part number 3614378 (symmetric bolt holes). Balancer is in excellent condition. Pulley has been stripped and primed and has some minor pitting. $125 plus shipping or...
Unused, never mounted reproduction clutch fan unit dated 1/21/70. Current cost from Tony’s parts, including date stamp, is $335. Asking $275 plus shipping or free delivery to Carlisle. Located in MD.
Thanks for the ad!