Search results for query: *

My F4

I think you can loosen both motor mount bolts and shift the engine a little to level it.

I have a set of Challenger ones that I was told they were for a Cuda. I always thought they were the same

That’s a ton of money for a 340.

FYI Challenger and cuda are a little different

I plan on going with 2 cars. Hopefully the weather will hold out.

Whatever way you have more room. Probably the bottom.

Look closely for that one spline that’s different on the box and coupler. It can only go on one way. You’ll probably need a puller to take off the pitman arm.

Younger crowd won’t even know what a Pinto is!

Stick with AMD

There should be a nut on the pivot ball on the frame rail bracket that holds the pivot ball in the Z bar. Loosen it up and pivot the Z bar up and slide it out of the other end.

Nice pair!

Replace the whole frame rail. When I did mine. I had the car on jack stands and made a brace from the floor to the rear bumper frame rail that way after you take out the old frame rail it will go in exactly where it came out. Front pretty much goes the same way. A lot easier if you have to...

Shipping it would probably be the easiest

I got it but I didn’t get if from the post office. Were they selling them there?

That is pretty cool

Is the rear hanging down? Try jacking up one side, might get you closer. Do you have the correct hardware?

Sounds like you got wires crossed somewhere or burned through together. You must have voltage to the coil when the car is off if it keeps running and the coil gets hot

I just did mine , I prepped and painted it like everything else. I’m not sure what it’s made of. I sanded it by hand so I wouldn’t go through it. The black on the quarter panel looks like someone just coated the rust with something. Or just put black silicone to seal the mounting hole