Separate names with a comma.
Welcome to For E Bodies Only !
We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!
I have a Performer RPM intake off a 440 for sale, it's been port matched to the intake gaskets. I'm selling it because it's too tall to run with a...
Do you still want to sell the two bumper bolts?
, I'm interested for $10
Huh, the 440 I used was from a 73 motor home and rebuilt before I got it. I'm sure the crankshaft was a cast crankshaft and it had a thin (15/16)...
So was the factory cast crank balancer you swapped to close to 2 inches thick?
I'm interested in the bumper bolts. Please call me at 320.241.9075
Please call me at 320.241.9075
Hope you figure out what the problem is, Good Luck!
I see the bolts now, looks good! Do you have the bottom transmission bolt too (7/16 - 20 X 2 1/4?
Thanks, looks like I'm really looking for the Action+ from Weiand.
Thanks, I really want the Action+ from Weiand
Anyone have a Weiand Action+ or Edelbrock CH4B intake manifold for a 440 RB for sale? Or know where there is one?
I only need one of the transmission bolts because I have one.
I'll watch for your response.
Yes I am interested, do you have pictures of the parts you have? I do need the rod for the 440 RB as I have the rod for the 383.
Can you post a picture of the bolts so I can verify what you have is correct?
Anyone have 2 of the bolts that hold the front bumper brackets to the frame on a 71 Cuda (I'm not sure if 70 thru 74 are the same?).
I also need...
I have a balancer from a 73 440 that was in a motor home, the balancer is 15/16 thick and the crankshaft is a cast crank.
Wanted - Kickdown pivot bracket assembly on driver side of bellhousing on 727 automatic transmission.
The engine is a 440 RB if that makes a...
Anyone have the transmission kickdown pieces that fasten to the driver side of bellhousing on a 727 automatic transmission? I need the part that...
I'm looking for a CH4B intake to use on a 440 shaker equipped Cuda, the engine has a new Edelbrock Performer RPM intake that is too tall.