Search results for query: *

it's definitely not a hard headliner. my AAW kit comes with new dome light wiring so might as well change it. I don't suspect that particular wire is bad though some dash wiring was definitely frankensteined. More than anything, I don't want to create another project by undoing too much of...

I suspected it could be opened that way but was hesitant because i'm a lot better at breaking things than fixing. I was able to test it and it worked. Thanks!

Is there a way to test the heater control light (yellow wire)? Can the bulb be changed or does the entire part has to be replaced? Has anyone sourced them anywhere? Thanks!

I've tried checking the shop manual's wiring diagrams but i'm hitting the easy button and reaching out to the think tank!! This module is on the backside of the dash on the passenger side with the black plug connected. I believe the wiring splits off including to the AC controls (red...

I'm going to replace the dome light wiring in my 70 Challenger however; my headliner is already installed. Can anyone suggest an easy way to fish the new wiring through without undoing or minimally undoing the headliner? Thanks!

Is this for an e-body

My biggest concern is eliminating an electrical item that will cause a gremlin when I install the AAW harness. Thanks for the clarification.

exactly what I needed! Thanks!!

my 70 challenger has the A01 package. I'm rebuilding my steering shaft from a column shift to manual and have a few questions about the light bar in the column. What function exactly does it do? is there a way to test it? do I actually need it? I ask because my replacement turn signal...

Does anyone have photos of where the pieces on the right go on a 70 challenger? Based on the manual, I believe I have the placement for the pieces on the left. Thanks in advance!

yes sorry. i'm trying to figure out how to clear out my mailbox

I only need two pieces, the driver side fender and the passenger door piece.

The install manual for the gauges states: "When selecting a mounting location, avoid placing the control module next to or just opposite of the firewall from ignition components, ie: Ignition coil, HEI, etc. Ignition components can emit tremendous amounts of electrical noise, affecting the...

I only need a door and a fender piece. I assume you wouldn't want to break up the entire set so i'll keep it looking but thanks for digging them up.

Yeah, this all started because I'm redoing the wiring with a AAW kit. I started with the steering column and pulled the dash. Which of course exposed the AC box and got this snowball rolling. So i'd hate to reinstall the dash to then have to remove it a second time to install the vintage air...

Originality is of low concern to me since my car was born a 318 column shift car and at some point, changed to a 360 crate engine with B&M automatic floor shifter. I undid that and added a silver sport 5 speed because, of course, I had to have a pistol grip manual. But I digress, I'm most...

All, I need some assistance with a turn signal switch as i rebuild my steering column. My 70 Challenger is a rally dash car but based on wiring schematics, it currently has a signal switch for a standard cluster. as you can see in the picture, I have no idea why the splice was made. As I shop...

Thanks!

I've read how these cars typically fry the connectors because of the load they carry and mine is no exception. so i have a few questions as i rebuild my column. Can the original just be rewired or is it just not worth the hassle? can anyone recommend a sturdy aftermarket ignition switch...

Definitely take your time Terry and get healthy first! I have plenty of other car issues that need attention. Thanks everyone for the input!