Search results for query: *

Did you buy your exhaust yet? If you haven't you may be able to buy that when you order your exhaust. When I bought my exhaust from TTI, I ordered everything that I needed from them. My car was a single exhaust car too.

Welcome to the site. You will most likely be able to get all your answers here. Lots of very knowledgeable people here.

I use Champion plugs in my 440 6brrl. She starts right up and idles great. 1K miles on them so far.

If you could, pull the new items out of the carrier and lay them next to the old parts and compare. I would think the difference would be able to be seen. If not I would contact Mancini Racing with your question. They should be able to answer you.

Glad you chose the Red one. Great progress and its looking great. Keep posting the progress.

Welcome to the site from Massachusetts! Look forward to questions and more pictures of the Challenger.

My original time delay relay wasn't working so I took it apart. It is just a contact that is closed when hot, and opens when it cools down, approximately 20-30 seconds. The contacts get dirty. I used 220 sandpaper and just dragged it across the contacts to clean them. Works like a champ once again.

When troubleshooting always split the problem in two so that you can rule out one or the other, ie unplug the rear lamp harness in the drivers kick panel and check that half first. Make sure the rear lamp harness has a good ground. My 73 has the ground wire near the drivers side taillight...

Thank you. I will check out FBBO.

Hello All. Has anyone every rebuilt or know where to get parts to rebuild the heater control valve from a 1973 Barracuda? I know other years and body lines may have used this type. I took mine apart and the small round rubber seal broke in pieces because it had hardened. I see some NOS ones for...

Looking good.

Can't wait to see the progress. Great work so far.

Welcome to the site! Very helpful people here. Can't wait to see some pics.

You can send your break booster out for repair. I used Vacuum Brake Boosters | Power Brake Booster Exchange, Lynwood to rebuild my booster and they plated it also. There are other companies that rebuild them too.

Front and rear bumper ette's in very nice condition. With a little polish and they will be great driver quality. $200 OBO not including shipping.

Bingo!

Here are the pictures of the filler pieces. PM me if you are interested.

Welcome to the site from Massachusetts.

Welcome to the site. Look forward to seeing some pictures.

I still have all 3 pieces. Let me take a picture of it and post it here. I will do it tonight when I get out of work.