Search results

Read factory install first,then forget most of it if you are doing it yourself. The 4th picture is a mark made on the A pillar bottom of the seam.this is a good reference to start from if you top is still on. You will need 2 quarts.I might have done it with one if I didn't mess up at first,a 1...

Found 3 staples on each side of the front.2nd picture shows top is not under drip rail.Used a green pad to remove glue. Didn't remove it as I would have liked. used a rubber disk with duct tape.removed it a lot quicker and easier by hand,made little balls of glue. original paint in the middle...

Install vinyl top.Some details and measurements that might help.The inside of the inside of the white line was established with seam on end and drawn. The black line is the outer edge of the seam with the vinyl lifted up and drawn.Used a framing square in drip rail to lay out on sail panel...

The links are to challenger parts for sale. Info for 5 ads on craiglist 1 Dodge challenger parts 1971 - auto parts - by owner - vehicle... 2 Dodge challenger parts 1971 - auto parts - by owner - vehicle... 3 Challenger - auto parts - by owner - vehicle automotive sale 4...

Challenger 70-74 convertible top switch. Checked for continuity. good working order. removed from service mid 70s $220+ $20 shipping.

Challenger 70-74 convertible top switch. Checked for continuity. good working order. removed from service mid 70s $220+ $20 shipping.